摘要
含聚污水不仅难于处理,而且由于其乳状液十分稳定,常规含油分析检测中,正己烷溶剂很难将污水中的原油完全萃取出来。使用絮凝剂BHQ-10辅助正己烷溶剂使得水样中的原油完全溶解在正己烷溶剂中,研究了其加入方式和加入浓度。结果表明:在正己烷萃取后加入BHQ-10为100 mg/L时,测试含油值最接近真实值。
Polymer-bearing wastewater is difficult to cannot be extracted completely from polymer-bearing be treated. Since the emulsion of it is very steady, crude oil wastewater with hexane solvent in the process of regular oil- content analysis and detection. Flocculant BHQ-10 has been added to assist the crude oil in water sample to be dissolved completely in hexane solvent. The adding mode and adding concentration are both researched. The experimental results indicate that after the hexane extraction, adding the flocculant BHQ-10, when its concentration is 100 mg/L, the oil-content detected is the closest to the real oil concentration.
出处
《工业水处理》
CAS
CSCD
北大核心
2013年第2期73-75,共3页
Industrial Water Treatment
关键词
含聚污水
含油分析
正己烷溶剂
萃取
絮凝剂
polymer-bearing wastewater
analysis of oil-content
hexane solvent
extraction
flocculant