期刊文献+

RDX为主体的石油射孔弹用高聚物炸药研究

Study on Polymer Explosives Used in Oil Perforating Charge Based on RDX
原文传递
导出
摘要 分析了国内传统石油射孔弹炸药存在的缺陷,通过对粘结剂、钝感剂进行研究得到了以 RDX 为基的石油射孔弹用高聚物炸药配方.新配方中 RDX 含量比传统炸药提高了0.4%~0.5%;松装密度达到0.92g/cm3,高于传统炸药8.2%~15.0%;压药打靶实验证明新炸药射孔性能稳定,射孔平均深度大于传统炸药7.1%. In this paper, the defects of the traditional oil perforating explosives were analyzed, the new polymer explosives formula was obtained through the research of binder and desensitizer. The content of RDX in new formula was increased 0.4%~0.5% than that in the traditional explosives. The loose density of new formula explosives was 0.92g/cm3, which is higher than that of traditional explosives by 8.2%-15.0%. The perforating performance of new explosives was proved stable through test, the average perforation depth was deeper than that of traditional explosives by 7.1%.
出处 《火工品》 CAS CSCD 北大核心 2012年第6期30-33,共4页 Initiators & Pyrotechnics
关键词 RDX 粘结剂 钝感剂 新配方 RDX Binder Insensitive agent New formula
  • 相关文献

参考文献7

二级参考文献11

  • 1王北海.NEPE推进剂用中性聚合物键合剂的分子设计[J].固体火箭技术,1994,17(3):47-53. 被引量:14
  • 2侯林法.复合固体推进剂[M].北京:宇航出版社,1994..
  • 3LIU Yong-liang,WANG Yuan.An investigatation of interactions between RDX and polymer binder by ftir photoacoustic spectroscopy [A].Proceedings of 17th International Pyrotechnics Seminar Combined With the 2nd Beijing,Internation Symposium on Pyrotechnics and Explosives[R]Vol.1,347-352,Beijing,October,28-31,1991.
  • 4Dagley I J.An evaluation of ethylene-vinyl acetate copolymers as desensitizers for RDX an insensitive booster compositions prepared BYI the slurry coating technique [R].MRL Technical Report MRL-TR-89-33,1989.
  • 5Philip S H.Coating process for plastic bonded explosive [P].USP 6485587 B1,Nov.26,2002.
  • 6Hyung S Kim,Hyoun S Kim.Method for preparing a compactable explosive [P].USP 5565651,Oct.15,1996.
  • 7David J Kasprzyk,David A Bell.Characterization of a slurry process used to make a plastic-bonded explosive [J].Propellants,Explosives,Pyrotechnics,1999(24):333-338.
  • 8Terry L St Clair,Poquoson Donald J Progar Yonktown.Polyimide molding powder coating,adhesive and matrix resin [P].USP 5147966,Sep.15,1992.
  • 9杨春盛.双基推进剂硝胺脱湿及其键合剂分子设计[J].火炸药,1997,20(3):25-28. 被引量:9
  • 10陈立新,沈新元.相转化法的湿法成膜机理[J].膜科学与技术,1997,17(3):1-6. 被引量:35

共引文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部