期刊文献+

铁矿粉吸水性能研究 被引量:2

Study on Water Absorption Performance of Iron Ore Fines
下载PDF
导出
摘要 研究了不同铁矿粉对水分的吸收性能,通过自制吸水装置测量了各种矿石的吸水速率曲线。定义矿粉亲水性H为:吸水速度k与最大吸水百分含量的乘积,以此表征铁矿粉的吸水能力,效果较理想。通过对几种矿粉的不同粒级进行吸水实验,结果得出:>1 mm粒级的亲水性较差,随着粒度减小,亲水性变好,粒度为0.25~0.5 mm时,亲水性最好,吸水指数H呈倒"V"型分布;粒度越小,吸水性能越接近。 The moisture absorption performances of different iron ore fines were studied, the water absorption rate curves of various kinds of ores were measured through the homemade suction device. It is defined that the hydrophilicity H of ore fines is the product of water absorption rate k and maximum water absorption percentage content,it is used to represent the water absorption capability of iron ore fines, and the effect is ideal. Through water absorption experiment with several kinds of ore fines of different particle size, the result is that, the hydrophilicity of 〉 1 mm size of ion ore fines is poor,and it will get better with he decrease of particle size. When the particle size is 0.25 - 0.5 mm, the hydrophilicity is the best, the absorption index H shows a "V" shape distribution;the smaller the particle size is, the more close the water absorption performance is.
出处 《烧结球团》 北大核心 2013年第1期1-5,17,共6页 Sintering and Pelletizing
基金 国家自然科学基金资助项目(51174023)
关键词 水分 烧结 铁矿粉 吸水性能 moisture sintering iron ore fines water absorption performance
  • 相关文献

参考文献6

  • 1范晓慧,甘敏,李文琦,王强,谢路奔,胡林,陈许玲,袁礼顺.烧结混合料适宜制粒水分的预测[J].北京科技大学学报,2012,34(4):373-377. 被引量:13
  • 2LV X W,BAI C G,QIU G B. Moisture capacity definition,measurement,and application in determining the optimal water content in granulating[J].ISIJ International,2010,(05):695-701.
  • 3吴力华,陈雪峰.攀钢烧结混合料制粒因素的研究与优化[J].烧结球团,2006,31(1):19-22. 被引量:16
  • 4Rankin W J,Yang J J. Granulation of mixture and its effect on sintering[J].Sintering Pelletizing,1988,(04):55.
  • 5Sun Q,Liu Z Q. Discussion on strengthening the effect of mixture granulation[J].Shougang Sci Technol,1998,(01):41.
  • 6Khosa J,Manuel J. Predicting granulating behaviour of iron oresbased on size distribution and composition[J].ISIJ International,2007,(07):965.

二级参考文献12

  • 1Rankin W J;杨浚锦.混合料制粒及其在烧结中的作用[J]烧结球团,1988(04):55.
  • 2Kasai E,Rankin W J,John F G. Effect of raw mixture propertieson bed permeability during sintering[J].ISIJ International,1989,(01):33.
  • 3Kapur P C,Runkana V. Balling and granulation kinetics revisi-ted[J].International Journal of Mineral Processing,2003,(1-4):417.
  • 4Venkataramana R,Gupta S S,Kapur P C. A combined model forgranule size distribution and cold bed permeability in the wet stageof iron ore sintering process[J].International Journal of Mineral Processing,1999,(01):43.
  • 5Kano J,Kasai E,Saito F. Numerical simulation model forgranulation kinetics of iron ores[J].ISIJ International,2005,(04):500.
  • 6Litster J,Waters A,Nicol S. A model for predicting the size dis-tribution of product from a granulating drum[J].Trans Iron Steel InstJpn,1986,(12):1036.
  • 7Maeda T,Fukumoto C,Matsumura T. Effect of addingmoisture and wettability on granulation of iron ore[J].ISIJ International,2005,(04):477.
  • 8Venkataramana R,Kapura P C,Gupta S S. Modelling of granu-lation by a two-stage auto-layering mechanism in continuous in-dustrial drums[J].Chemical Engineering Science,2002,(10):1685.
  • 9Ellis B G,Loo C E,Witchard D. Effect of ore properties on sin-ter bed permeability and strength[J].Ironmaking and Steelmaking,2007,(02):99.
  • 10Khosa J,Manuel J. Predicting granulating behaviour of iron oresbased on size distribution and composition[J].ISIJ International,2007,(07):965.

共引文献27

同被引文献18

引证文献2

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部