摘要
基于ANSYS有限元软件,结合压电材料的物理特性对新型压电陶瓷管状驱动器的驱动性能进行了仿真,获得了其最大位移、出力及响应频率特性参数,结果表明该驱动器适用于结构振动控制装置的研发;利用上述新型驱动器,提出了一种可实时调节摩擦力的智能阻尼器,并对其进行了相关动态力学性能分析,获得了其正弦简谐作用下的本构关系及相应循环一周所消耗能量的计算公式。
Combined with the physical properties of piezoelectric material, the driving performance ot a new type of piezoelectric ceramic tubular drive was simulated based on the ANSYS finite element software. Its maximum displacement, output force and frequency response parameters are obtained. The results indicate that the drive is {it for the research of Structural vibration control device. A smart damper which could real-time adjust itself friction is put forward based on the new drive. Meanwhile, dynamic mechanical properties of the damper were analyzed. Finally, constitutive relation and energy calculation formula in one cycle are obtained under the sinusoidal harmonic effects.
出处
《材料科学与工程学报》
CAS
CSCD
北大核心
2013年第1期50-54,67,共6页
Journal of Materials Science and Engineering
基金
国家自然科学基金重大研究计划面上资助项目(90715003)
国家自然科学基金资助项目(51178388
10972168)
教育部科学技术研究重点资助项目(209124)
国家重点实验室开放资助项目(08KF02)
教育部高等学校博士学科点专项科研基金资助项目(200807030002)
关键词
新型压电陶瓷管状驱动器
驱动性能
变摩擦阻尼器
动态力学性能
new type piezoelectric ceramic tubular drive~ drive character~ variable friction damper^dynamic mechanical properties