摘要
采用静电纺丝法在18～32kV、PVP／Zn（CH3COO）2前驱体浓度为15％、20％、24％和28％，纺丝距离为6～15cm的条件下，制备了直径为200～500nm的微纳米纤维。通过扫描电子显微镜（SEM）分析得出在纺丝电压为25～28kV，纺丝距离为10～12cm，溶液质量浓度为24％时纺出的微纳米纤维结构较为均一。
Prepared with a diameter of 18-32 kV, PVP / Zn （CH3COO）2 precursor concentration was 15%, 20%, 24% and 28%, and the conditions of 6-15cm spinning distance , 200-500nm PVP/Zn （CH3COO）2 Composite fiber was prepared by electrostatic spinning method. SEM showed that the spinning voltage of 25～28kV, spinning distance of 10～12cm, the mass concentration of 24% when spun out by the micro-nano-fibrous structure was relatively homogeneous.
出处
《化学工程师》
CAS
2013年第2期65-67,共3页
Chemical Engineer
