摘要
提出了一种基于JN5148和LabVIEW的水质监测系统,实现了对水质多参数的实时监测,并对系统的硬件和软件分别进行了分析和设计。本系统主要采用了JN5148单芯片作为处理器,使用Zig BeePRO协议栈作为网络通信协议。利用RS—232串口使下位机与上位机相连,在上位机中采用LabVIEW软件设计了可视化的人机界面,给系统的调试和网络的检测提供了极大的方便。经过实验证明:本系统对水样的多参量采集的实时性和准确性比较高。
A water quality monitoring system based on JN5148 and LabVIEW agreement is proposed, monitoring on parameters of the water quality is realized, and the hardware and software of the system are analyzed and designed. This system mainly adopts JN5148 single chip as processor. Zig Bee PRO protocol stack is used as the network communication protocol. This system use RS-232 serial connect upper PC and lower PC, a visualization of human-computer interface is designed in the PC by LabVIEW, which provides great convenience for the system commissioning and network detection. It is verified through the experiment that, the system has real-time and higher accuracy in multi-parameter collecting of water sample.
出处
《传感器与微系统》
CSCD
北大核心
2013年第3期93-96,共4页
Transducer and Microsystem Technologies
基金
江苏省研究生培养创新工程资助项目(CXZZ11-0465)
江南大学博士研究生科学研究基金资助项目(JUDCF11003)
