期刊文献+

退火处理对铝导线性能的影响 被引量:2

Effects of Annealing Treatment on Property of Aluminium Conductor
下载PDF
导出
摘要 通过对铝导线的导电率、抗拉强度和断裂伸长率的测试分析,研究了不同退火温度及保温时间对其性能的影响。结果表明:适当的退火温度及保温时间可使铝导线的导电率和断裂伸长率提高,同时降低其抗拉强度。最佳的退火处理工艺参数为:退火温度310℃,保温时间30min,直接空冷。经该工艺处理的铝导线,其抗拉强度为129N/mm^2,断裂伸长率为15.0%,电阻率为2.782×10^8Ω·m,导电率为62%IACS,该铝导线的力学性能和导电性符合电线电缆导体线芯的使用要求。 The electric conductivity, tensile strength and elongation at break of aluminium conductor were analyzed, and the effects of different annealing temperature and holding time on its property were researched. The results show that the appropriate annealing temperature and holding time can increase the electric conductivity and elongation at break and reduce the tensile strength of aluminium conductor. The optimal parameters are that annealing temperature is 310℃, holding time is 30 min, and air cooling. The tensile strength of processed aluminium conductor is 129 N/mm^2, the elongation at break is 15.0%, the resistivity is 2.782×10^8Ω·m, and the electric conductivity is 62%IACS, which conform to the operating requirements of conductor core for electric wire.
出处 《铸造工程》 2013年第2期8-10,共3页 Foundry Engineering
关键词 铝导线 退火处理 导电率 抗拉强度 断裂伸长率 aluminium conductor annealing treatment electric conductivity tensile strength elongationat break
  • 相关文献

参考文献4

二级参考文献16

  • 1王庆良.稀土对铝导线导电性能和力学性能的影响[J].上海有色金属,1995,16(4):229-231. 被引量:15
  • 2王守礼.钢芯铝合金铰线在高海拔重冰线路上的应用[J].电线电缆,1987,(5):17-17.
  • 3张密林 鲁化一 唐定骧.稀土铝及铝合金中的应用进展[J].稀土,1988,9(5):34-34.
  • 4朱元凯 李文超 张云.稀土元素在导电铝中的作用[J].稀有金属,1986,10(5):337-337.
  • 5Hirchhorn I S. Recent applications of the rare earth metals in nonferrous metallurgy [J]. J. Metal., 1970, 22(10): 40.
  • 6Dugdale J S. The Electrical Proprrties of Metals and Alloys[M]. Edward Arnold Limited Press, 1977. 2.
  • 7王祝堂,铝合金及加工手册,1989年,75页
  • 8王守礼,电线电缆,1987年,5期,17页
  • 9余宗森,金属物理,1982年,36页
  • 10雷广孝.稀土在铝及铝合金中的作用和应用概况[J].轻合金加工技术,1990,18(2):5-10. 被引量:19

共引文献44

同被引文献8

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部