回弹法检测隔热耐磨衬里强度的探索与实践

Research & Practice of Rebound Method to Test Insulation/Wear-resisting Lining Strength

目前对设备衬里强度的原位检查是定性的 ,通过对国产炼油化工装置所用隔热耐磨衬里的一系列回弹试验 ,表明隔热耐磨衬里的回弹是可行的 ,进而得出衬里回弹的专用测强曲线和经验公式 。

At the present,to test equipment lining strength is a qualitative analysis method.It is proved that rebound method to test insulation/wear-resisting lining strength is possible after a series of the tests.The test diagram was established which can be referenced while the lining strength is tested in quanlitative analysis.