期刊文献+

ACFM检测系统的信号调理电路 被引量:10

Signal Conditioning Circuit for ACFM Detection System
下载PDF
导出
摘要 根据交流电磁场检测(简称ACFM)的信号特征,设计了一种用于ACFM检测系统的信号调理电路。该电路由低噪声的程控放大、自适应带通滤波、后级可调放大和真有效值转换四部分组成。经试验验证,该信号调理电路适用范围宽、检测精度高、可获得理想的检测信号特征曲线,且工作稳定可靠,可用于高性价比的ACFM检测仪器中。 According to the signal characteristics of the alternating current field measurement( ACFM), a kind of signal conditioning circuit was designed, for ACFM inspection system. This circuit was composed of four parts : programmed by the low noise amplifier, adaptive band-pass filter, adjustable amplifier and true RMS. After experimental verification, this circuit can be used cost- effective ACFM testing instruments for its advantages : a wide range of usage, high precision and obtain the ideal characteristic curve of the detection signal, stability and reliabivity.
机构地区 南昌航空大学
出处 《仪表技术与传感器》 CSCD 北大核心 2013年第1期74-78,共5页 Instrument Technique and Sensor
基金 国家自然科学基金资助项目(51065024)
关键词 交流电磁场检测 信号调理电路 特征曲线 alternating current field measurement signal conditioning circuit characteristic curve
  • 相关文献

参考文献10

二级参考文献21

共引文献86

同被引文献78

  • 1林凌,王小林,李刚,王朔,刘铭.一种新型锁相放大器检测电路[J].天津大学学报(自然科学与工程技术版),2005,38(1):65-68. 被引量:26
  • 2亓和平.交流电磁场检测技术装备及应用[J].石油机械,2005,33(6):77-80. 被引量:10
  • 3张宏波,曾立波,柯亨玉,许贤泽,孙勇,张云飞.基于AOTF的新型近红外光谱仪控制系统设计[J].应用基础与工程科学学报,2006,14(1):137-143. 被引量:2
  • 4王艳菊,王玉田,刘静.CH_4检测系统微弱信号处理电路研究[J].仪表技术与传感器,2006(8):41-43. 被引量:11
  • 5SAGUY H.Ffaw detection in metals by the ACPD technique:Theory and experiments [ J ]. NDT and E International, 2007,40 ( 7 ) : 505 - 509.
  • 6LOW C K. Defect evaluation using the alternating current field measurement technique[ J ] .Non-Destructive Testing and Condition Monitoring,2004,46(10) :598-605.
  • 7Saguy H, et al. Flaw detection in metals by the ACPD technique: Theory and experiments[j]. NDT and E International, 2007, 40(7):505-509.
  • 8Ren Shangkun, Zhu Zhibin, Lin Tianhua, et al. Design for %he ACFM Sensor and the Signal Processing Based on Wavelet Denoise[C]. 2009 2nd International Congress on Image and Signal Processing (CISPr09), Pressed by IEEE.
  • 9Smith M, el; &l. The detection of pipeline SCC flaws using the ACFM technique[J]. Non-Destructive Testing &rid Condition Monitoring, 2005, 47 (12): 765-768.
  • 10Knight N1J, et al. Effect of residual stress on ACFM crack measurements in drill collar threaded connections[J]. NDT & E International, 37 (5): 337-343.

引证文献10

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部