期刊文献+

Influence of Blade Outlet Angle on Performance of Low-specific-speed Centrifugal Pump 被引量:4

Influence of Blade Outlet Angle on Performance of Low-specific-speed Centrifugal Pump
原文传递
导出
摘要 In order to analyze the influence of blade outlet angle on inner flow field and performance of low-specific-speed centrifugal pump, the flow field in the pump with different blade outlet angles 32.5°and 39° was numerically calculated. The external performance experiment was also carried out on the pump. Based on SIMPLEC algorithm, time-average N-S equation and the rectified k-ε turbulent model were adopted during the process of computation. The distributions of velocity and pressure in pumps with different blade outlet angles were obtained by calculation. The numerical results show that backflow areas exist in the two impellers, while the inner flow has a little improvement in the impeller with larger blade outlet angle. Blade outlet angle has a certain influence on the static pressure near the long-blade leading edge and tongue, but it has little influence on the distribution of static pressure in the passages of impeller. The experiment results show that the low-specific-speed centrifugal pump with larger blade outlet angle has better hydraulic performance. In order to analyze the influence of blade outlet angle on inner flow field and performance of low-specific-speed centrifugal pump, the flow field in the pump with different blade outlet angles 32.5°and 39° was numerically cal- culated. The external performance experiment was also carried out on the pump. Based on SIMPLEC algorithm, time-average N-S equation and the rectified k-ε turbulent model were adopted during the process of computation. The distributions of velocity and pressure in pumps with different blade outlet angles were obtained by calcula- tion. The numerical results show that backflow areas exist in the two impellers, while the inner flow has a little improvement in the impeller with larger blade outlet angle. Blade outlet angle has a certain influence on the static pressure near the long-blade leading edge and tongue, but it has little influence on the distribution of static pres- sure in the passages of impeller. The experiment results show that the low-specific-speed centrifugal pump with larger blade outlet angle has better hydraulic performance.
出处 《Journal of Thermal Science》 SCIE EI CAS CSCD 2013年第2期117-122,共6页 热科学学报(英文版)
基金 supported by National Natural Science Foundation of China granted No.50976105,No.51276172 Zhejiang Provincial Natural Science Foundation Granted No.R1100530
关键词 叶轮叶片 低比转速 出口角 泵性能 离心泵 SIMPLEC算法 数值计算 内流场 centrifugal pump blade outlet angle numerical simulation external characteristic
  • 相关文献

参考文献1

二级参考文献9

  • 1Akamatsu, T., and Tsukiya, T., 1998, "Development of a centrifugal blood pump with magnetically suspended impeller and the related fluid mechanical problems." Sadhana, Vol.23, No.5-6, pp.597-603.
  • 2Horiguchi, H., Matsumoto, S., Tsujimoto, Y., Sakagami, Masaaki, and Tanaka, Shigeo, 2009, "Effect of Internal Flow in Symmetric and Asymmetric Micro Regenerative Pump Impellers on Their Pressure Performance," International Journal of Fluid Machinery and Systems, Vol.2, No. 1, pp.72-79.
  • 3Jie, S., Shuhong, L., Huijing, Y., and Yulin, W., 2008, "Numerical Simulation and PIV Measurement on the Internal Flow in a Centrifugal Pump," ASME Fluids Engineering Division Summer Meeting, Jacksonville, USA, Proc. FEDSM2008-55025.
  • 4Yulin, W., Huijing, Y., Jie, S., and Shuhong, L., 2009, "Experimental Study on Internal Flow of a Mini Centrifugal Pump by PIV Measurement," International Journal of Fluid Machinery and Systems, Vol.2, No.2, pp121-126.
  • 5Shigemitsu, T., Fukutomi, J., Nasada, R., 2009, "Study on Performance and Internal Flow Condition of Mini Turbo-Pump", Proceedings of the 10th Asian International Conference on Fluid Machinery, Kuala Lumpur, Malaysia, CD-ROM, AICFM 112.
  • 6Nishi, M., Liu, S., Yoshida, K., Tsukamoto, H. and Kouya, S., 1998, "Tip-Clearance Effect on the Performance of a High Speed Mini-Turbopump, Proceedings of The Third International Conference on Pumps and Fans, Beijing, China, pp.223-231.
  • 7Liu, S., Nishi, M., Yoshida, K., and Tsukamoto, H., 2000, "A Study on a High Speed Mini Turbopump(2nd Rep: Effect of Bypass Flow on the Pump Performance", Proceedings of 2nd Symp. on Fluid Machinery and Fluid Engineering 1, pp.633-636.
  • 8Liu, S., Nishi, M., Yoshida, K., 2001, "Impeller Geometry Suitable for Mini Turbo-Pump", ASME J.Fluids Engineering.,Vol. 123, No.3, pp.500-506.
  • 9Choi, Y., Kurokawa, J., and Matsui, J., 2006, "Performance and Internal Flow Characteristics of a Very Low Specific Speed Centrifugal Pump", ASME J.Fluids Engineering.,Vol. 128, No.2, pp.341-349.

共引文献7

同被引文献13

引证文献4

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部