摘要
利用光学显微镜、TEM和EBSD研究了退火温度对双辊连铸无取向硅钢再结晶组织的影响。结果表明,900℃退火后组织分布不均匀,有大量带状组织,平均晶粒尺寸29.5μm。提高退火温度,晶粒尺寸增大,组织均匀化程度增加,1050℃退火时,带状组织基本消失,平均晶粒尺寸42.2μm。
Effect of annealing temperature on recrystallization microstructure of non-oriented electrical steel produced by twin-roll casting process was investigated using OM, TEM and EBSD. The results show that the reery, stallization mierostnlcture is uneven because of many banded grains existing,average grain size is 29.5 μm. With annealing temperature increasing, the recrystallization grain size inereases, microstruelure becomes more homogeneous. When 1050 C annealing, the bandcxt structure almost disappear and average grain size is 42.2 μm.
出处
《金属热处理》
CAS
CSCD
北大核心
2013年第3期61-64,共4页
Heat Treatment of Metals
基金
国家自然科学基金(50734001和51004035)
关键词
无取向硅钢
双辊连铸
退火温度
组织
nun-oriented electrical steels
twin-roll casting
annealing temperature
microstructure