期刊文献+

Fatigue Property of Hot Rolled and Cold Rolled Strips 被引量:1

Fatigue Property of Hot Rolled and Cold Rolled Strips
原文传递
导出
摘要 Tension-tension fatigue properties of hot rolled and cold rolled strips with same contents and sizes were measured by using group test method at room temperature in air. The results showed that the fatigue properties of the hot rolled strips were obviously higher than those of the cold rolled strips. The hot rolled strips with similar or higher tensile strength exhibited superior fatigue property over the cold rolled strips. Fracture morphologies observed using scanning electronic microscope (SEM) showed that the hot rolled strips exhibited larger fracture areas, indicating a slightly lower plasticity, and more even fracture microstructure and stable properties. It is feasible and reliable to replace cold rolled strips with hot rolled strips. Tension-tension fatigue properties of hot rolled and cold rolled strips with same contents and sizes were measured by using group test method at room temperature in air. The results showed that the fatigue properties of the hot rolled strips were obviously higher than those of the cold rolled strips. The hot rolled strips with similar or higher tensile strength exhibited superior fatigue property over the cold rolled strips. Fracture morphologies observed using scanning electronic microscope (SEM) showed that the hot rolled strips exhibited larger fracture areas, indicating a slightly lower plasticity, and more even fracture microstructure and stable properties. It is feasible and reliable to replace cold rolled strips with hot rolled strips.
出处 《Journal of Iron and Steel Research(International)》 SCIE EI CAS CSCD 2013年第2期48-51,共4页 钢铁研究学报(英文版)
基金 Item Sponsored by National Natural Science Foundation of China(51074210)
关键词 hot rolled strip cold roiled strip fatigue property replacement of cold rolled strip hot rolled strip cold roiled strip fatigue property replacement of cold rolled strip
  • 相关文献

参考文献5

二级参考文献15

  • 1[1]Paolo Bobig,Roberto,Borsi,ect.New mill stand with flexible crown control for rolling ultrathin hot Strip[J].MPT,1999,(6):100-110.
  • 2[2]Wilfried Bald,G U′nter Kneppe,Dieter Rosenthal,etc. Innovative technologies for strip production[J].MPT,1999,(8):74-86.
  • 3[3]Chendricks, Rasim W, Janssen H, etc. The casting rolling plant of Thyssen Krupp Stahl[J]. Steel times Internatinal,1999,227(8):306-308.
  • 4[8]Hudd R C. Some Aspects of the Annealing of Low Carbon Strip Steel. Metals and Materials, 1987,3 (2):71.
  • 5[9]Morrison W B. Nitrogen in the Steel Product. Ironmaking and Steelmaking,1989,16(2):123.
  • 6[10]田乃嫒.薄板坯连铸连轧(第二版).冶金工业出版社.2004.234.
  • 7Schneider C R A, Maddox S J. Best Practice Guide on Statisti eal Analysis of Fatigue Data [M]. Granta Park: International Institute of Welding, 2006.
  • 8Spiegel Murray R. Sehaum's Outline of Theory and Problems of Probability and Statistics [M]. New York: McGRAW HILL Publishing Company, 1990.
  • 9International Organization for Standardization. ISO/DIS 14345 Fatigue Testing of Welded Components [S].2000.
  • 10ASTM International. ASTM E739-91 Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (E-N) Fatigue Data [S]. 2004.

共引文献20

同被引文献1

引证文献1

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部