期刊文献+

气相色谱法测定四氢苯酐中杂质马来酸酐 被引量:2

Determination of maleic anhydride in tetrahydrophthalic acid anhydride by gas chromatography
原文传递
导出
摘要 建立了气相色谱法测定四氢苯酐中杂质马来酸酐含量的分析方法。样品经乙腈超声溶解后,用气相色谱分析,外标法定量。目标物马来酸酐在0.25~20.0 mg/L范围内线性关系良好(r=0.9999),检测限(S/N=3)为0.10 mg/L,在25、500和1000 mg/kg的3个添加水平下,目标物的平均回收率为99.4%~108.0%,相对标准偏差(n=6)为0.85%~3.6%。 An analytical method based on GC has been established for the determination of maleic anhydride impurity in tetrahydrophthalic acid anhydride. The sample was dissolved in acetonitrile with ultrasonic processing, detected by GC and quantified by the external standard method. The calibration curve for the target analyte was linear in the range of 0. 25 ~ 15.0 mg/L (r = 0. 9999), and the limit of detection (S/N = 3 ) was 0. 10 mg/L. The mean recoveries of the target analyte at the spiked levels of 25,500 and 1000 mg/kg were 99.4% - 108.0% with the relative standard deviations( n = 6) of 0.85% ~ 3.6%.
出处 《分析试验室》 CAS CSCD 北大核心 2013年第4期122-124,共3页 Chinese Journal of Analysis Laboratory
基金 江苏出入境检验检疫局科技计划(2012KJ06)资助
关键词 气相色谱法 四氢苯酐 马来酸酐 Gas chromatography Tetrahydrophthalic acid anhydride Maleic anhydride
  • 相关文献

参考文献11

二级参考文献58

共引文献30

同被引文献17

  • 1杨本晓,鲜啟鸣,林汉华,刘峻,于红霞.双酚A分子印迹聚合物的制备及其吸附机制初探[J].南京大学学报(自然科学版),2007,43(4):351-357. 被引量:7
  • 2Thami T, Nasr G,Bestal H, et al. J Polym Sci A Polym Chem, 2008,46:3546.
  • 3Noll W, Chemistry and Technology of Silicones, Academic Press, New York, 1986.
  • 4Sun C J. The Principle and Technique of Gas Chromatography Analysis. Beijing : Chemical Industry Pres,1979 :127.
  • 5Sternberg J C,Gallaway W S,Jones D T L,et al. New York: Academic Press, 1962: 231.
  • 6Perkin G,Jr,Rouayheb G M, Lively L D, et al. New York: Academic Press, 1962:269.
  • 7Ackman R C. J Gas Chrom,1964, 2: 173.
  • 8Scanlon J T,Willis D. J Chrom Sci,1986,23; 333.
  • 9Novak J, Bocek P,Kepetand L, et al. J Chromatogr, 1970, 51: 385.
  • 10Hainova 0,Bocek P,Novak J et aL J Chrom, 1967 , 5: 401.

引证文献2

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部