期刊文献+

单轴扩散焊接中管道变形的初步仿真分析 被引量:2

Preliminary simulation analysis on channel deformation during uniaxial diffusion welding
下载PDF
导出
摘要 提出了一种利用ANSYS软件模拟单轴扩散焊过程的仿真计算方法,主要研究采用单轴扩散焊工艺制备聚变实验包层模块冷却管板中的管道变形问题,同时采用低活性马氏体钢进行了相关实验研究,并将实验结果与仿真结果进行对比以验证计算方法的可靠性。结果表明,在单轴扩散焊过程中,管道出现较大变形;仿真计算结果与实验结果吻合良好。这表明本方法将有助于单轴扩散焊制造冷却板的工艺改进。 A simulation method based on ANSYS was proposed to evaluate channel deformation of cooling plate during uniaxial diffusion welding process for TBM. In order to verify the reliability of this method, results of simulation were compared with those of experiment conducted by using the low activated martensite steel. It is showed that large deformation occurred on the channels of cooling plate during uniaxial diffusion welding. The theoretical simulation results agree well with experiment results. It is indicated that this method will be helpful for the technology improvement of manufacturing cooling plate by uniaxial diffusion welding.
作者 钟原 罗天勇
出处 《核聚变与等离子体物理》 CAS CSCD 北大核心 2013年第1期48-53,共6页 Nuclear Fusion and Plasma Physics
基金 国家磁约束核聚变能研究专项资助项目(2009GB1080042010GB112005)
关键词 实验包层模块 单轴扩散焊 管道变形 ANSYS Test blanket module Uniaxial diffusion welding Channel deformation ANSYS
  • 相关文献

参考文献6

  • 1Feng K M, Pan C H. Overview of design and R&D of solid breeder TBM in China [J]. Fusion Engineering and Design, 2008, 83(7-9): 1149-1156.
  • 2Avon der Weth, Kempe H, Aktaa J, et al. Optimization of the EUROFER uniaxial diffusion weld [J]. Journal of Nuclear Materials, 2007, 367-370: 1203-1207.
  • 3赵周,陈茂爱,王平怀,冯开明,张国书.中国固态包层模块单轴热扩散焊接实验初步研究[J].核聚变与等离子体物理,2012,32(1):51-55. 被引量:3
  • 4蒲广益.ANSYS Workbenchl2基础教程与实例详解[M].北京:中国水利水电出版社,2010.
  • 5Tavassoli A -A F, Alamo A, Bedel L, et al. Materials design data for reduced activation martensitic steel type EUROFER [J]. Journal of Nuclear Materials, 2004, 329-333: 257-262.
  • 6王平怀,谌继明,李雄伟,等.低活性铁素体钢CLF-1的拉伸及冲击性能研究[A].第十三届全国等离子体科学技术会议论文集[C].2007.

二级参考文献6

  • 1冯开明,张国书,罗德礼,等.中国氦冷固态实验包层模块系统设计描述文件[R].成都:核工业西南物理研究院,2007.
  • 2Van Der Schaaf B,Diegele E,Laesser R,et al.Structural materials development and databases[J].Fusion Engineering and Design,2006,81:893.
  • 3Von Der Weth A,Aktaa J.Mockups of blanket cooling plates manufactured in different diffusion welding setups[J].J.Nucl.Mater.,2009,386388:437.
  • 4Von Der Weth A,Aktaa J.Manufacturing experiment on a cooling plate for a blanket breeder unit[J].Fusion Engineering and Design,2008,83:1263.
  • 5Von Der Weth A,Kempe H,Aktaa J,et al.Optimization of the EUROFER uniaxial diffusion weld[J].J.Nucl.Mater.,2007,367370:1203.
  • 6Schleisiek K,Lechler T,Schafer L,et al.Diffusion welding parameters and mechanical properties of martensitic chromium steels[J].J.Nucl.Mater.,2000,283287:1196.

共引文献3

同被引文献12

引证文献2

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部