期刊文献+

深水分离器结构非线性屈曲分析 被引量:3

Nonlinear Buckling Analysis for Subsea Separator Structure
下载PDF
导出
摘要 建立了深水分离器结构的实体数值模型,分析了分离器结构的多阶屈曲模态,并在此基础上,引入材料非线性本构关系和几何大变形理论,深入研究了结构非线性屈曲特性,其结果可为深水分离器结构设计和校核提供参考。 Subsea separator serves in the bottom of the sea with high outer pressure. Buckling instability is a key factor for subsea separator structure designing. This paper focus on the subsea separator structure nonlinear buckling characteristics. The simulation model of the subsea separator structure was established by element Solid 95. And buckling modes of the subsea separator structure were analyzed. On this basis, the nonlinear buckling characteristics were studied by introducing the material nonlinear constitutive relation and geometric large deformation theory, which laid technology foundation for deep water separator structure designing and checking.
出处 《石油化工设备》 CAS 2013年第2期31-34,共4页 Petro-Chemical Equipment
基金 国家高技术研究发展计划(863计划)(SS2013AA090701) 国家自然科学基金项目青年基金(50905187) 中国海洋石油总公司项目水下分离器及相关技术研究课题(C/KJF HG001-2009)
关键词 深水分离器 非线性屈曲 屈曲模态 仿真分析 subsea separator nonlinear buckling buckling modes simulation analysis
  • 相关文献

参考文献8

二级参考文献24

  • 1朱凼凼,冯咬齐,向树红.KM5A真空容器屈曲稳定有限元分析[J].航天器环境工程,2004,21(3):23-28. 被引量:8
  • 2韩铭宝,杨青春.在径向载荷和轴向冲击联合作用下的圆柱壳塑性稳定性分析[J].应用力学学报,1994,11(2):25-32. 被引量:8
  • 3韩强,马宏伟,张善元,杨桂通,武际可.冲击扭矩作用下弹性圆柱壳中应力波导致的动力屈曲问题[J].应用数学和力学,1996,17(1):1-7. 被引量:6
  • 4陈延.外压容器设计有关问题探讨[J].压力容器,2007,24(1):60-62. 被引量:9
  • 5王仁 韩铭宝 等.受轴向冲击的圆柱壳塑性动力屈曲实验研究[J].力学学报,1983,15(5):509-514.
  • 6Najafizadeh M M, Hasani A, Khazaeinejad P. Mechanical stability of functionally graded stiffened cylindrical shells [ J ]. Applied Mathematical Modelling, 2009, 33 (2) : 1151 - 1157.
  • 7Paik J K. Residual ultimate strength of steel plates with longitudinal cracks under axial compression-Nonlinear finite element method investigations[J]. Ocean Engineering, 2009, 36(3/4) :266 - 267.
  • 8Pellegrino C, Maioranaa E, Modena C. Linear and nonlinear behaviour of steel plates with circular and rectangular holes under shear loading[J/OL]. Thin-Walled Structures, 2008, 47(6/7) : 1 - 10.[2008-12-21]. http. ffdx. doi. org/10. 1016/j. tws. 2008.11. 001.
  • 9Ioki K, Kushiyama M, Yagi Y, et al. A study on the buckling behaviour of a bellows-type vacuum vessel with torus shape in a reversed field pinch device[J]. Fusion Engineering and Design, 1995, 30:245 - 252.
  • 10徐芝纶.弹性力学.北京:高等教育出版社,1996:.

共引文献30

同被引文献32

引证文献3

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部