期刊文献+

锂离子电池正极材料LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2的研究现状 被引量:2

Present Status on Research of LiNi_(1/3)Co_(1/3)Mn_(1/3)O_2 as Cathode Material for Lithium Ion Batteries
下载PDF
导出
摘要 介绍了LiNi1/3Co1/3Mn1/3O2的晶体结构及电化学反应特性,并从LiNi1/3Co1/3Mn1/3O2的制备方法、离子掺杂及表面包覆等方面对其研究现状进行了综述。LiNi1/3Co1/3Mn1/3O2相对于LiCoO2而言具有较高的热稳定性、放电比容量及循环性能,是一种较理想的锂离子电池正极材料,但是其高温及大电流环境下的循环及倍率性能仍然有待改进。 The crystal structure and electrochemical reaction characteristics of the LiNil/3 Col/3 Mnl/3 02 was introduced in this article, and the development of the synthetic methods, doping with different elements and coating with different compounds of the LiNi1/3Co1/3Mn1/3O2 were reviewed with 27 ref- erences. Compared with LiCo02, the LiNi1/3Co1/3Mn1/3O2 has better thermal stability, cycling per- formance and high discharge specific capacity than LiCo02, which is a kind of rather perfect candi- cate for the cathode materials of lithium ion batteries. However, the cycling performance and rate ca- pability of the LiNi1/3Co1/3Mn1/3O2 need to be further improved while working in high temperature and heavy current.
出处 《合成化学》 CAS CSCD 北大核心 2013年第2期251-256,共6页 Chinese Journal of Synthetic Chemistry
基金 国家科学技术部重大科学研究计划项目(2011CB932604)
关键词 锂离子电池 正极材料 LINI1 3Co1 3Mn1 3O2 制备方法 掺杂 表面包覆 综述 lithium ion battery cathode material LiNi1/3Co1/3Mn1/3O2 synthetic methods doping surface coating review
  • 相关文献

参考文献27

  • 1Chebiam R V, Kannaan A M, Prado F, et al. Com- parison of the chemical stability of high energy density cathodes of lithium-ion batteries [ J ]. Electrochem Communi ,2001,3:624 - 627.
  • 2Ohzuku T, Makimura Y. Layered lithium insertion material of LiNi1/3 Co1/3 Mn1/3 02 for lithium batteries [ J ]. Chem Lett ,2001,7 : 642 - 643.
  • 3Yabuuehi N, Ohzuku T. Novel lithium insertion mate- rial of LiNi1/3 Coin Mn1/3 02 for advanced lithium-ion batteries [ J ]. J Power Sources,2003,171 : 119 - 121.
  • 4M V Ready, G V Subba Rao, B V R Chowdari. Syn- thesis by molten salt and cathodic properties of Li ( Ni1/s Co1/3 Mn1/3 ) 02 [ J ]. J Power Sources, 2006,159: 263 - 267.
  • 5Jingjing Liu, Weihua Qiu, Lingyan Yu, et al. Studieson the low-heating solid-state reaction method to syn- thesize LiNi1/3 Co1/3 Mn1/3 02 cathode materials [ J ]. J Power Sources ,2007,174:701.
  • 6Jianggang Li, Xiarlgming He, Maosong Fan, et al. Syn- thesis of spherical LiNi1/3 Co1/3 Mn1/302 cathode materi- als for li-ion batteries [ J ]. Ionics,2006,12:77 - 80.
  • 7Cuixia Cheng, Eong Tan, I-Iaowen Liu, et al. High rate performance of the cathode material LiNiv3 CO1/3 Mn1/3 02 synthesized using low temperature hydroxide precipitation [J]. Mater Res Bull,2011 ,adi:2032 -2055.
  • 8Zhaorong Chang, Zhongjun Chen, Feng Wu, etal. Syn- thesis and properties of high tap-density cathode material for lithium ion battery by the eutectic molten-salt method [J]. Solid State lonics ,2008,179:2274 -2277.
  • 9Ping He, Haoran Wang, Lu Qi, et al. Electrochemi- cal characteristics of layered LiNi1/3 Co1/3 Mn1/3 02 and with different synthesis conditions [ J ]. J Power Sourees,2006,160:627.
  • 10Zhang Chuan-fu, Yang Ping, Dai Xi, et al. Synthe- sis of LiNi1/3 Co1/3 Mn1/3 O2 cathode material via ox- alate precursor[ J ]. Trans Nonferrous Met Soe, China, 2009,19:635 -641.

同被引文献22

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部