期刊文献+

微车汽油发动机开发方案的研究 被引量:2

Research on Small Gasoline Engine Layout Developed for Miniature Vehicle
下载PDF
导出
摘要 通过分析中国汽车动力总成节能环保的主要课题,阐述了目前汽车动力总成产品的主要技术,并结合国内汽车行业发展趋势,基于平台化、系列化、低成本、高适配配性的考虑,梳理出一套适合于整车厂采用的微型汽油机平台发展规划方案。以一款小型汽油机的开发为例,通过合理的配置及标定,使发动机全负荷最低燃油消耗率达到同级别发动机的领先水平,满足国家第Ⅲ阶段燃油消耗率和国-Ⅳ排放法规要求,其整体水平优于国内同类产品。 Main topics of domestic auto powertrain industry, energy conservation and environmental protection, expounded its important technique in current, and forecast the development trend of domestic auto industry were analyzed. Based on consideration of the platformization, serialization, low cost and high adaptability, a platform planning scheme suitable to vehicle works for developing the miniature gasoline engine was submitted. As an example of practical applieation, in a small gasoline engine development project, through reasonable configuration and calibration, engine min. SFC in full load conditions reaches outstanding level of same rank engine, meeting China III phase SFC specifications and China IV emission regulations. The prototype overall performance is at the leading position of domestic products.
作者 彭浪 石太亮
出处 《内燃机工程》 EI CAS CSCD 北大核心 2013年第2期67-73,共7页 Chinese Internal Combustion Engine Engineering
关键词 内燃机 微车汽油机 经济性 可靠性 排放 IC engine miniature vehicle gasoline engine economy reliabilityemission
  • 相关文献

参考文献11

二级参考文献35

  • 1王建昕.高效车用汽油机的技术进步[J].内燃机学报,2008,26(S1):83-89. 被引量:34
  • 2王建昕,蒋恒飞,王燕军,何邦全,田辛.汽油均质混合气柴油引燃(HCII)燃烧特性的研究[J].内燃机学报,2004,22(5):391-396. 被引量:35
  • 3Korthals J P.The Impact of Reducing Carbon Emission on the Global Automotive Industry.Fahrzeug-und Motorentechnik, Aachen Kolloquium,2008.
  • 4Rothenpieler J.Challenge : World-Volkswagen in the Compact Car Segment Fahrzeug-und Motorentechnik,Aachen Kolloquium,2006.
  • 5Lauer S.A New Cylinder Deactivation of FEV and MAHLE.Fahrzeug-und Motorentechnik,Aachen Kolloquium,2007.
  • 6李骏.FAW Develop Automatic transmission- DCT.ATZ
  • 7李骏.FAW's Energy and Environment Strategy and Core Technology Route.Fahrzeug-und Motorentechnik,Aachen Kolloquium 2008.
  • 8Moritaka Matsuura, Koji Korematsu, Junya Tanaka. Fuel consumption improvement of vehicles by idling stop [C]. SAE Paper 2004-01-1896, 2004.
  • 9Shigeo Yamamoto, Dai Tanaka, Jun Takemura, et al. Control and combustion in gasoline direct injection en- gines for reducing cold-start emissions[C]. SAE Paper 2001-01-0550, 2001.
  • 10John Bishop, Ashok Nedungadi, Gregory Ostrowski, et al. An engine start/stop system for improved fuel economy[C]. SAE Paper 2007-01-1777, 2007.

共引文献92

同被引文献18

  • 1GAO J,SUO J. Preparation and characterization of the electrodeposited Cr-Al2O3/SiC composite coating[J].Applied Surface Science,2011,257(22):9643-9648.
  • 2ZENG Z,ZHANG J. Electrodeposition and tribological behavior of amorphous chromium-alumina composite coatings[J].Surface & Coatings Technology,2008,202(12):2725-2730.
  • 3JANG J H,JOO B D,LEE J H,et al. Effect of hardness of the piston ring coating on the wear characteristics of rubbing surfaces[J].Metals and Materials International,2009,15(6):903-908.
  • 4WEGLEWSKI W,BASISTA M,CHMIELEWSKI M,et al. Modeling of thermally induced damage in the processing of Cr-Al2O3 composites[J].Composites Part B:Engineering,2012,43(2):255-264.
  • 5SUN K N,HU X N,ZHANG J H,et al. Electrodeposited Cr-Al2O3 composite coating for wear resistance[J].Wear,1996,196(1):295-297.
  • 6WAYNE S F,SAMPATH S,ANAND V. Wear mechanisms in thermally-sprayed mo-based coatings[J].Tribology Transactions,1994,37(3):636-640.
  • 7高志,赵源,李英.快速磨损试验机及其试验方法[J].润滑与密封,1998,23(4):43-45. 被引量:7
  • 8章硕,胡树兵,陈文旗,张辽.灰铁基Cr-n-Al_2O_3复合电刷镀层的性能[J].材料工程,2012,40(9):23-27. 被引量:5
  • 9罗庆,王利华,普学仁,肖海.高耐蚀性镀硬铬工艺研究[J].表面技术,2012,41(5):99-101. 被引量:5
  • 10李奇,王宪成,蔡志海,底月兰,何星.重型车辆发动机电镀Cr活塞环的摩擦学性能[J].中国表面工程,2013,26(1):91-97. 被引量:6

引证文献2

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部