摘要
科威特中央银行新总部主塔楼为240m的高层建筑,塔楼平面类似L形,其内侧为钢管混凝土斜交网格结构,外侧为钢筋混凝土剪力墙。3～5层设置两榀巨型转换桁架,桁架支座节点极其重要且构造和受力非常复杂。基于美国标准AWS 2008及Eurocode 3对该节点进行了简化计算,并采用ANSYS软件,考虑填充混凝土的材料非线性,对节点进行了应力和位移分析。通过分析结果可以看出,该节点具有较强的强度和刚度,能够保证节点的安全及使用要求。
The new headquarters building of Central Bank in Kuwait is 240 meters high.The plane shape of the tower is similar to L shape.The inner side of the tower is grid structure with concrete filled steel tubes,and the outer side is RC shear wall structure.Two mega transition trusses with very important and complicated support joints are set on level 3 to 5.Based on AWS 2008 and Eurocode 3,simplified calculation of the joint was given.ANSYS software was used to analyze the stress and deformation of the joint,considering the material nonlinearity of the concrete filled in the pipe.The results show that the joint has strong strength and stiffness,which can satisfy the requirements of safety and using performance.
出处
《建筑结构》
CSCD
北大核心
2013年第6期14-16,39,共4页
Building Structure
关键词
转换桁架
支座节点
简化计算
有限元分析
transition truss
support joint
simplified calculation
finite element analysis
