摘要
为满足《城镇污水处理厂污泥处置混合填埋用泥质》(GB/T23485—2009)中脱水后污泥含水率应小于60%的规定,设计采用了污泥深度脱水技术对洋里污水处理厂原有污泥处理系统进行改造。本文对工程设计进行了详细介绍,总结设计要点,对同类工程设计具有一定的借鉴意义。
In order to meet the rule that dewatered sludge moisture content should be less than 60% in Disposal of Sludge from Municipal Wastewater Treatment Plant-Quality of Sludge for Co-landfilling, the process of was adopted in the design for the original sludge treatment system transformation at Yongli sewage treatment plant. In this paper, the design of process units was described in detail and the design points was summarized, in order to provide reference for other similar projects
出处
《工程建设与设计》
2013年第4期100-101,104,共3页
Construction & Design for Engineering
关键词
污泥
含水率
深度脱水
sludge
moisture content
sludge deep dewatering
