期刊文献+

Wide-angle and broadband graded-refractive-index antireflection coatings

Wide-angle and broadband graded-refractive-index antireflection coatings
下载PDF
导出
摘要 The design and fabrication of graded-refractive-index (GRIN) antireflection (AR) coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a genetic algorithm is used in the design of the GRIN AR coatings. The average reflectance over a wavelength range from 400 nm to 800 nm and angles of incidence from 0° to 80° could be reduced to only 0.1% by applying an optimized AR coating onto BK7 glass. The optimization of step-graded GRIN AR coating is then further investigated in detail. A two-layer AR coating was deposited by electron beam evaporation with glancing angle deposition technology, and the positional homogeneity was improved by depositing the film from two opposite directions. The microstructure of the AR coating was investigated by scanning electron microscopy, and the residual reflectances of the coating sample are in agreement with theoretical calculations. The optimized GRIN AR coatings are beneficial to increasing the efficiency of light utilization. The design and fabrication of graded-refractive-index (GRIN) antireflection (AR) coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a genetic algorithm is used in the design of the GRIN AR coatings. The average reflectance over a wavelength range from 400 nm to 800 nm and angles of incidence from 0° to 80° could be reduced to only 0.1% by applying an optimized AR coating onto BK7 glass. The optimization of step-graded GRIN AR coating is then further investigated in detail. A two-layer AR coating was deposited by electron beam evaporation with glancing angle deposition technology, and the positional homogeneity was improved by depositing the film from two opposite directions. The microstructure of the AR coating was investigated by scanning electron microscopy, and the residual reflectances of the coating sample are in agreement with theoretical calculations. The optimized GRIN AR coatings are beneficial to increasing the efficiency of light utilization.
出处 《Chinese Physics B》 SCIE EI CAS CSCD 2013年第4期253-257,共5页 中国物理B(英文版)
关键词 ANTIREFLECTION WIDE-ANGLE BROADBAND refractive-index profile antireflection wide-angle broadband refractive-index profile
  • 相关文献

参考文献22

  • 1Diedenhofen S L, Vecchi G, Algra R E, Hartsuiker A, Muskens O L, Immink G, Bakkers E P A M, Vos W L and Rivas J G 2009 Adv. Mater. 21 973.
  • 2Southwell W H 1985 Appl. Opt. 24 457.
  • 3Kong W J, Shen Z C, Wang S H, Shao J D, Fan Z X and Lu C J 2010 Chin. Phys. B 19 044210.
  • 4Zhang J C, Fang M, Jin Y X and He H B 2012 Chin. Phys. B 21 014202.
  • 5Southwell W H 1983 Opt. Lett. 8 584.
  • 6Fu X Y, Wang S M, Deng D G, Yi K, Shao J D and Fan Z X 2005 Chin. Phys. Lett. 22 3173.
  • 7Spiller E, Haller I, Feder R, Baglin J E E and Hammer W N 1980 Appl. Opt. 19 3022.
  • 8Fahr S, Ulbrich C, Kirchartz T, Rau U, Rockstuhl C and Lederer F 2008 Opt. Express 16 9332.
  • 9Mahdjoub A and Zighed L 2005 Thin Solid Films 478 299.
  • 10Kuo M L, Poxson D J, Kim Y S, Mont F W, Kim J K, Schubert E F and Lin S Y 2008 Opt. Lett. 33 2527.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部