摘要
通过两种试验方法测定苯板与土工膜的摩擦角,结果表明,采用土工合成材料综合测定仪时,随着膜的粗糙程度增大,粘聚力增大,摩擦角减小,且苯板产生了变形,故结果存在一定误差;采用非散粒体材料摩擦角测定仪时,可得到苯板与光面土工膜的稳定摩擦角,且该仪器构造简单,便于操作,但不能得到苯板与一布一膜、两布一膜之间的稳定摩擦角,仍需进一步改进。
Two methods are used to test the friction angle between geomembrane and polystyrene board. The results show that: (a) with the increasing of surface asperity of geomembrane, the friction angle between geo-membrane and polystyrene board is reduced and the cohesive force is increased when using Comprehensive Geotechnical Synthetic Materials Determination, and at meantime, the polystyrene board generates deformation; and (b) there are good regularity with the friction angle between smooth geomembrane and polystyrene board when using Non-granular Mixtures Friction Angle Determination, but there are not good regularity with the friction angle between composite geomembrane and polystyrene beard. The Non-granular Mixtures Friction Angle Determination is simple and easy to operate, but should be further improved.
出处
《水力发电》
北大核心
2013年第5期84-86,89,共4页
Water Power
基金
新疆水利水电工程重点学科基金资助项目(xjzdxk-2002-10-05)
教育部高等学校博士点专项科研基金资助项目(200807580007)
关键词
苯板
土工膜
保温
摩擦特性
试验
polystyrene board
geomembrane
insulation
friction characteristics
experiment