一种基于STM32的铅酸蓄电池智能充放电系统的设计

A Design for Lead-acid Battery Smart Charge and Discharge System Based on STM32

本文提出了一种基于STM32控制器的蓄电池智能充放电系统设计,以CAN总线作为蓄电池状态检测网的通信核心,其优点主要是稳定、实时、抗干扰能力强。通过CAN通信连接上位机和硬件平台,通过STM32控制器,在线测量蓄电池电流、电压和温度参数,进而控制蓄电池的充电过程,并通过CAN通信反馈到上位机。

This paper presents a smart battery charge and discharge system based on STM32. The CAN bus as the battery state detection network communications core, the main advantage is stable, real-time, anti-interference ability. PC connected via CAN communication and hardware platforms, online measurement of the battery through the STM32 controller current, voltage and temperature parameters, and thus control the battery charging process, and through CAN communication back to the host computer.