浅谈薄壁不锈钢管在工程中防腐措施
摘要
本文针对薄壁不锈钢管道安装过程中的腐蚀情况,进行原因分析,并通过工程实例,提出不锈钢管防腐应注意的措施。
出处
《中国建筑金属结构》
2013年第03X期30-31,共2页
China Construction Metal Structure
参考文献5
-
1左亚洲.建筑给排水薄壁不锈钢管道应用探讨[J].给水排水,2009,35(12):1-1. 被引量:8
-
2缪德伟,陈彤字,明珠.建筑给水用薄壁不锈钢管承插焊连接技术[J].给水排永.2009.(12).
-
3王睿.薄壁不锈钢管在生活供水中腐蚀性试验研究[D].北京工业大学,2012.
-
4李光强,张丽琴,秦庆伟,董训祥,朱诚意.氮含量和环境温度对316L不锈钢耐腐蚀性的影响[J].武汉科技大学学报,2009,32(3):225-228. 被引量:5
-
5齐达,李晶,董力,余健.200系列不锈钢耐腐蚀性能研究[J].钢铁钒钛,2010,31(2):72-76. 被引量:16
二级参考文献9
-
1伍千思.不锈钢标准中的铬锰系(美国200系)奥氏体不锈钢[J].冶金标准化与质量,2004,42(6):34-37. 被引量:11
-
2石锋,崔文芳,王立军,姜周华,刘春明.高氮奥氏体不锈钢研究进展[J].上海金属,2006,28(5):45-50. 被引量:51
-
3U Kamachi Mudali,B Reynders,M Stratmann.Localised corrosion behaviour of Fe-N model alloys[J].Corrosion Science,1999,41:179-189.
-
4R A Perren,T A Suter,P J Uggowitzer,et al.Corrosion resistance of super duplex stainless steels in chloride ion containing environments:investigations by means of a new microelectrochemical method:I.precipitation-free states[J].Corrosion Science,2001,43:707-726.
-
5R A Perren,T A Suter,C Solenthaler,et al.Corrosion resistance of super duplex stainless steels in chloride ion containing environments:investigations by means of a new microelectrochemical method:II.influence of precipitates[J].Corrosion Science,2001,43:727-745.
-
6Maria Janik Czachor,Marcin Pisarek,Piotr Kedzierzawski,et al.Characterization of the effects of hydrostatic extrusion on grain size,surface composition and the corrosion resistance of austenitic stainless steels[J].Materials Characterization,2008,59:1 292-1 300.
-
7S Ningshen,U Kamachi Mudali,V K Mittal,et al.Semiconducting and passive film properties of nitrogen-containing type 316LN stainless steels[J].Corrosion Science,2007,49:481-496.
-
8U Kamachi Mudali,Baldev Raj.高氮钢和不锈钢--生产、性能与应用[M].李晶,黄运华,译.北京:化学工业出版社,2006.
-
9许崇臣,冈毅民,李民保.氮对高纯奥氏体不锈钢耐晶间腐蚀性能的影响[J].腐蚀科学与防护技术,1997,9(3):192-196. 被引量:23
共引文献26
-
1吴金应.高层建筑给排水节能节水的实现[J].价值工程,2010,29(23):77-77. 被引量:13
-
2董书亮,刘建伟.焊接技术在薄壁不锈钢管道连接中的创新应用[J].安装,2010(10):53-54. 被引量:1
-
3陆超,龚海涛.VDC贮槽封头开裂分析及整改[J].腐蚀与防护,2010,31(10):815-816.
-
4范如意,芦凤桂,刘霞,赵健,乔尚飞.NiCrMoV钢汽轮机转子堆焊接头组织性能研究[J].热加工工艺,2011,40(21):137-139.
-
5高丽娟.建筑给排水节能节水技术措施[J].科技创新与应用,2012,2(1):78-78. 被引量:5
-
6钱绍祥,殷苏民,张飞霞,张志凤.搭接率对AISI202焊接接头激光冲击应力分布的影响[J].表面技术,2013,42(6):15-17. 被引量:7
-
7范强强.316L奥氏体不锈钢的腐蚀行为[J].全面腐蚀控制,2013,27(11):39-43. 被引量:16
-
8丁国清,杨海洋,杨万国,张波,曲政.两种不锈钢在冷却塔冷凝酸液中的耐蚀性能[J].装备环境工程,2014,11(1):13-17. 被引量:9
-
9李莹锋.建筑给排水系统的节能设计[J].江西建材,2014(3):15-16. 被引量:1
-
10何丰.有关建筑给排水节能节水技术的思考[J].城市建筑,2015,0(8):215-215.
-
1张延斌,贾绍军,王海庆.薄壁不锈钢管道安装工艺[J].化工建设工程,2000,22(4):28-29.
-
2张翔翔.卡压式薄壁不锈钢管道安装技术要点的分析[J].建材与装饰(上旬),2016(12):25-26.
-
3张文华,冯小军,王炯,文长宏,熊筠.薄壁不锈钢管在自动喷水灭火系统中的应用研究[J].给水排水,2010,36(10):124-126.
-
4黄力.关于建筑给排水薄壁不锈钢管道的应用分析[J].黑龙江科技信息,2016(13):233-233.
-
5王勇,李炳书.薄壁不锈钢管道卡压连接施工工艺[J].山西建筑,2011,37(28):98-100.
-
6左亚洲.建筑给排水薄壁不锈钢管道应用探讨[J].给水排水,2009,35(12):1-1. 被引量:8
-
7高惠润,江仟,刘世峰.浅谈建筑用薄壁不锈钢管道的工程应用管理[J].安装,2013(11):48-50. 被引量:2
-
8徐从容.建筑给水工程中薄壁不锈钢管道的选用[J].建材与装饰(上旬),2010(6):303-304.
-
9郑仁宝,焦海斌.洁净薄壁不锈钢管道自动无痕熔接施工技术[J].石油和化工设备,2015,18(7):70-74.
-
10史东,罗汾毅.给水管道卡压施工技术[J].建筑知识:学术刊,2012(B06):352-352.