期刊文献+

水下防喷器组控制系统深水模拟试验装置研制 被引量:17

Development of Deep-water Simulation Experimental Device for Subsea Blowout Preventer Stack Control System
下载PDF
导出
摘要 防喷器组控制系统在深水环境的工作可靠性一直是海洋钻井业高度关注的问题。研制了用于水下防喷器组控制系统及其阀件功能测试和可靠性研究的深水模拟试验装置,包括模拟3 000m水深的大型高压舱,用于控制系统原理样机的深水模拟试验;模拟4 200m水深的小型高压舱,用于深水电磁阀和深水液压阀的深水功能试验和寿命试验。介绍了该试验装置的液控系统、电控系统、水下监控系统的设计原理。试验结果表明:该试验装置能够满足深水防喷器组控制系统的测试要求。 Reliability of blowout preventer stack control system is highly concerned in subsea oil drilling industry all the time. The subsea stimulation test device for BOP control system and its valves function and reliability was designed and developed, which covers big high pressure cabin used in 3 000 meters deep water for original prototype, and small high pressure cabin used in 4 200 meters deep water for solenoid and deep water function and life test. The design principle of hydraulic system,electricity control system, subsea monitor system is introduced. The test result shows that the test device can meet the requirement for the subsea BOP stack in deep water.
出处 《石油矿场机械》 2013年第4期1-5,共5页 Oil Field Equipment
基金 国家高技术研究发展计划(863计划)"3000m深水防喷器及其控制系统研制"(2007AA09A101) 国家科技重大专项"深水钻井防喷器组及控制系统研制"(2011ZX05027-001-05)
关键词 防喷器 控制系统 深水模拟装置 Blowout preventer Control system Deep water simulation device
  • 相关文献

参考文献5

二级参考文献16

  • 1徐荣强,陈建兵,刘正礼,杜威.喷射导管技术在深水钻井作业中的应用[J].石油钻探技术,2007,35(3):19-22. 被引量:55
  • 2Jeanjean P. Innovative design method for deepwater surface casings [R] .SPE 77357, 2002: 2-5.
  • 3Gerwick B C Jr. Construction of marine and offshore structures [M]. CRC Press, 2007 : 49 - 55.
  • 4Kyriakides S, Corona E. Mechanics of Offshore Pipe lines[M]. Oxford: Elsevier,2007 : 131-194.
  • 5Naoto Sakakibara, Stelios Kyriakides, Edmundo Coro na. Collapse of partially corroded or worn pipe under external pressure[J]. International Journal of Mechanical Sciences,2008,50(12):1 586-1 597.
  • 6Seok-Hwan Ahn, Ki-Woo Nam, Koji Takahashi, et al. Comparison of experimental and nite element analyti- cal results for the strength and the deformation of pipes with local wall thinning subjected to bending moment[J]. Nuclear Engineering and Design, 2006, 236 (2):440-155.
  • 7赵连标.高压液下的应变测量.动力系统工程,1986,(3):52-59.
  • 8Maziar Ramezani,Zaidi Mohd Ripin. Combined exper- imental and numerical analysis of bulge test at high strain rates using split Hopkinson pressure bar appa ratus[J]. Journal of Materials Processing Technolo- gy,2010,210 (8):1 061-1 069.
  • 9杨进,曹式敬.深水石油钻井技术现状及发展趋势[J].石油钻采工艺,2008,30(2):10-13. 被引量:146
  • 10蔡晓闻,高连新,常龙,杜建青.石油套管几何缺陷对抗挤强度的影响[J].石油矿场机械,2009,38(2):38-41. 被引量:11

共引文献21

同被引文献78

引证文献17

二级引证文献28

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部