期刊文献+

应用玻璃质光纤制备透光混凝土的研究 被引量:13

Study on the light transmitting concrete preparation with glassy optical fiber
下载PDF
导出
摘要 采用水泥砂浆作为透光混凝土的基体材料,把两种玻璃质多模光纤平行排列在水泥砂浆中,制备出了透光混凝土。考察了光纤体积掺量的变化对透光混凝土材料的透光性能和强度的影响,结果表明:当光纤掺量一定时,芯纤直径较大的光纤使透光混凝土具有较高的透光率,透光率随光纤的掺量增加而增大;抗压强度随光纤掺量的增加而减小,抗折/抗压强度比随光纤的掺量增加而增大。 Two kinds of glassy multimode optical fiber were arranged in parallel in cement mortar as base material to prepare light transmitting concrete light transmitting concrete.Study on the influences of changes in optical fiber volume content to the light transmitting performance and strength of light transmitting concrete showed that, light transmitting concrete got higher light transmitting ratio when using optical fiber with bigger inner core, and the light transmitting ratio of it increased with the increase of optical fiber volume content;the compressive strength decreased and the ratio between flexural strength and compressive strength of light transmitting concrete increased a- long with the increase of the optical fiber content in volume.
作者 李悦 许志远
出处 《混凝土》 CAS CSCD 北大核心 2013年第4期141-143,共3页 Concrete
基金 国家自然科学基金(51072009) 北京市自然科学基金(2122010)
关键词 透光混凝土 玻璃质多模光纤 透光性能 压折强度 微观形貌 light transmitting concrete glassy multimode optical fiber light transmitting property compressive and flexural strength micro structure
  • 相关文献

参考文献10

  • 1郭健.浅谈透光复合材料[J].太原科技,2006(9):21-22. 被引量:2
  • 2陈卢松,黄争鸣.PMMA透光复合材料研究进展[J].塑料,2007,36(4):90-95. 被引量:14
  • 3王劭婷.北京榆构研制成功透光混凝土[J].混凝土世界,2009(7):92-92. 被引量:7
  • 4透明的混凝土[J].建材发展导向,2009,7(1):77-77. 被引量:2
  • 5李悦,许志远,辜中伟,等.Preparation of light transmitting cementbased material with optical fiber embedded by the means of parallel arrange[J].Advanced Materials Research,2012 : 391-392,677-682.
  • 6李悦,许志远,辜中伟,等.Research on the light transmitting cement mortar[J].Advanced Materials Research, 2012 : 450-451,397-401.
  • 7李悦,许志远,李战国,等.应用光纤平行排列法制备水泥基透光材料的方法[P].中国,201110021994.1,2011-08-31.
  • 8李悦,许志远,李战国,等.应用纺织光纤技术制备透光混凝土方法[P].中国,201110022019.2,2011-08-31.
  • 9尹衍楔.透光混凝土生产模组及其快速生产方法[P].中国,2007100007521.X.2008-08-06.
  • 10宋勇,李君,杨玉萍.分光光度法测玻璃透光率[J].仪器仪表与分析监测,2001(4):44-46. 被引量:4

二级参考文献47

  • 1李青山,白德安,蔡传英,贾宏革.聚甲基丙烯酸甲酯-蒙脱土纳米复合材料的研究[J].中国粉体技术,2000,6(z1):273-275. 被引量:7
  • 2巫辉,雷家珩,严精忠,李建宗.界面对MMA-St透光复合材料光学性能的影响[J].高分子材料科学与工程,1995,11(4):97-101. 被引量:2
  • 3高宏,郑俊萍,王建勋,高珊,姚康德.悬浮聚合聚甲基丙烯酸甲酯/蒙脱土纳米复合材料的制备及表征[J].中国塑料,2005,19(11):54-57. 被引量:4
  • 4有机玻璃疲劳和图谱编委会.有机玻璃疲劳和断口图谱[M].北京:科学出版社,1987:77-78.
  • 5Shih-Kai Cheng,Chuh-Yung Chen.Mechanical properties and strain-rate effect of EVA/PMMA in situ polymerization blends[ J ].European Polymer Journal,2004,40:1239-1248.
  • 6Takashi Ohnaga,Toshiaki Sato,Shiro Nagata.Miscibility and phase behaviour of methyl methacrylate copolymer and polycarbonate blends[ J].Polymer 1997,38(5):1073-1079.
  • 7E Schauer,L Berglund,G Pena.Morphological variations in PMMA-modified epoxy mixtures by PEO addition[ J].Polymer,2002,43:1241-1248.
  • 8P M Remiro,C Marieta,C C Riccardi,et al.Influence of curing conditions on the morphologies of a PMMA-modified epoxy matrix[ J ].Polymer,2004,42:9909-9914.
  • 9Eamor M Woo,Chean C Su.Phase micro-heterogeneity in bisphenol-A polycarbonate/poly(methyl methacrylate)blends,Polymer,1996,37 (18):4111-4118.
  • 10C J G Plummer,P h Beguelin,H-H Kausch.On the influence of particle morphology on microdeformation in rubber modified poly(methyl methacrylate)[ J].Polymer 1996,37(1):7-10.

共引文献23

同被引文献57

引证文献13

二级引证文献30

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部