期刊文献+

Hydroisomerization performance of platinum supported on ZSM-22/ZSM-23 intergrowth zeolite catalyst 被引量:9

Hydroisomerization performance of platinum supported on ZSM-22/ZSM-23 intergrowth zeolite catalyst
下载PDF
导出
摘要 Hydroisomerization catalysts Pt/ZSM-22, Pt/ZSM-23, and Pt/ZSM-22/ZSM-23 were prepared by supporting Pt on ZSM-22, ZSM-23, and intergrowth zeolite ZSM-22/ZSM-23, respectively. The typical physicochemical properties of these catalysts were characterized by X-Ray Diffraction (XRD), N2 absorption-desorption, Pyridine-Fourier Transform Infrared (Py-FTIR), Transmission Electron Microscopy (TEM), X-Ray Fluorescence (XRF), Scanning Electron Microscopy (SEM) and NH3- Temperature Programmed Desorption (NH3-TPD), and the performance of these catalysts in n-dodecane hydroisomerization was evaluated in a continuous down-flow fixed bed with a stainless steel tubular reactor. The characterization results indicated that the intergrowth zeolite ZSM-22/ZSM-23 possessed the dual structure of ZSM-22 and ZSM-23, and the catalyst Pt/ZSM-22/ZSM-23 had similar pores and weak acidity to Pt/ZSM-22 and Pt/ZSM-23 catalysts. Moreover, Pt/ZSM-22/ZSM-23 catalyst showed a high selectivity in hydroisomerization of long chain n-alkanes to mono-branched isomers. The evaluation results for n-dodecane hydroisomerization indicated that the activity of Pt/ZSM-22/ZSM-23 was the lowest, while the hydroisomerization selectivity was the highest among the three catalysts. The maximum yield of i-dodecane product was 68.3% over Pt/ZSM-22/ZSM-23 at 320 ℃. Hydroisomerization catalysts Pt/ZSM-22, Pt/ZSM-23, and Pt/ZSM-22/ZSM-23 were prepared by supporting Pt on ZSM-22, ZSM-23, and intergrowth zeolite ZSM-22/ZSM-23, respectively. The typical physicochemical properties of these catalysts were characterized by X-Ray Diffraction (XRD), N2 absorption-desorption, Pyridine-Fourier Transform Infrared (Py-FTIR), Transmission Electron Microscopy (TEM), X-Ray Fluorescence (XRF), Scanning Electron Microscopy (SEM) and NH3- Temperature Programmed Desorption (NH3-TPD), and the performance of these catalysts in n-dodecane hydroisomerization was evaluated in a continuous down-flow fixed bed with a stainless steel tubular reactor. The characterization results indicated that the intergrowth zeolite ZSM-22/ZSM-23 possessed the dual structure of ZSM-22 and ZSM-23, and the catalyst Pt/ZSM-22/ZSM-23 had similar pores and weak acidity to Pt/ZSM-22 and Pt/ZSM-23 catalysts. Moreover, Pt/ZSM-22/ZSM-23 catalyst showed a high selectivity in hydroisomerization of long chain n-alkanes to mono-branched isomers. The evaluation results for n-dodecane hydroisomerization indicated that the activity of Pt/ZSM-22/ZSM-23 was the lowest, while the hydroisomerization selectivity was the highest among the three catalysts. The maximum yield of i-dodecane product was 68.3% over Pt/ZSM-22/ZSM-23 at 320 ℃.
出处 《Petroleum Science》 SCIE CAS CSCD 2013年第2期242-250,共9页 石油科学(英文版)
基金 the financial supports form Petrochina(050508-04-02) the National Natural Science Foundation of China(No.21073235,and 20833011)
关键词 ZSM-22/ZSM-23 intergrowth zeolite platinum catalyst N-DODECANE HYDROISOMERIZATION ZSM-22/ZSM-23 intergrowth zeolite, platinum catalyst, n-dodecane, hydroisomerization
  • 相关文献

参考文献39

  • 1Aldrich H S and Wittenbrink R J. Lubricant base oil having improved oxidative stability. US Patent, 6008164. 1999.
  • 2F Alvarez F, Ribeiro F R, Perot G, et al. Hydroisomerization and hydrocracking of alkanes: 7. Influence of the balance between acid and hydrogenating functions on the transformation of n-Decane on PtHY Catalvsts. Journal of Catavlsis. 1996. 162(2: 179-189.
  • 3Campelo J M, Lafont F, Marinas J M. Hydroconversion of n-dodecane over Pt/SAPO-ll catalyst. Applied Catalysis A: General. 1998. 170(1): 139-144.
  • 4Coasne B, Grosman A, Ortega C and Simon M. Adsorption in noninterconnected pores open at one or at both ends: A reconsideration of the origin of the hysteresis Phenomenon. Physical Review Letters. 2002.88:256102-256105354.
  • 5Emies C A. Determination of integrated molar extinction coefficients for infrared absorption bands of pyridine adsorbed on solid acid catalysts. Journal of Catalysis. 1993. 141(2): 347-.
  • 6Francesconi M S, Ldpez Z E, Dayana U D, et al. MFI/MEL intergrowth and its effect on n-decane cracking. Catalysis Today. 2005. 107- 108(30): 809-815.
  • 7Geng C H, Zhang F, Gao Z X, et al. Hydroisomerization ofn-tetradecane over Pt/SAPO- 11 catalyst. Catalysis Today. 2004. 93-95(I): 485-491.
  • 8Girgis M J and Tsao Y P. Impact of catalyst metal-acid balance in n-hexadecane hydroisomerization and hydrocracking. Industrial and Engineering Chemistry Research. 1996.35(2): 386-396.
  • 9Gopal S and Smirniotis P G. Factors affecting isomer yield for n-heptane hydroisomerization over as-synthesized and dealuminated zeolite catalysts loaded with platinum. Journal of Catalysis. 2004. 225: 278- 287.
  • 10Gregg S J and Sing K S W. Adsorption, surface area and porosity (2nd Edition). London: Academic Press. 1982.

同被引文献101

引证文献9

二级引证文献47

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部