期刊文献+

DYNAMIC MECHANICAL BEHAVIOR OF 6061 AL ALLOY AT ELEVATED TEMPERATURES AND DIFFERENT STRAIN RATES 被引量:7

DYNAMIC MECHANICAL BEHAVIOR OF 6061 AL ALLOY AT ELEVATED TEMPERATURES AND DIFFERENT STRAIN RATES
原文传递
导出
摘要 The compressive stress-strain relationships of 6061A1 alloy over wide temperatures and strain rates are investigated. The dynamic impact experiments are performed using an im- proved high temperature split Hopkinson pressure bar apparatus. The experimental results are compared with those obtained by the modified Johnson-Cook constitutive model. It is found that the dynamic mechanical behavior depends sensitively on temperature under relatively low strain rates or on strain rate at relatively high temperatures. The good agreement indicates that it is valid to adopt the parameter identification method and the constitutive model to describe and predict the mechanical response of materials. The compressive stress-strain relationships of 6061A1 alloy over wide temperatures and strain rates are investigated. The dynamic impact experiments are performed using an im- proved high temperature split Hopkinson pressure bar apparatus. The experimental results are compared with those obtained by the modified Johnson-Cook constitutive model. It is found that the dynamic mechanical behavior depends sensitively on temperature under relatively low strain rates or on strain rate at relatively high temperatures. The good agreement indicates that it is valid to adopt the parameter identification method and the constitutive model to describe and predict the mechanical response of materials.
出处 《Acta Mechanica Solida Sinica》 SCIE EI CSCD 2013年第2期111-120,共10页 固体力学学报(英文版)
基金 Project supported by the State 973 Program of China (No. 2013CB03570) the National Natural Science Foundation of China (Nos. 11272259, 11002104, 10902090 and 11021202)
关键词 DYNAMICS PLASTIC high temperature ALLOY impact testing dynamics, plastic, high temperature, alloy, impact testing
  • 相关文献

参考文献33

  • 1Sunny, G, Yuan,F.P., Prakash,V. and Lewandowski,J., Effect of high strain rates on peak stress in a Zr- based bulk metallic glass. Journal of Applied Physics, 2008, 104: 093522.
  • 2Omar,M.F., Md AkilH., Ahmad,Z.A., Mkzuki,A.)t.M. and Yokoyama,T., Dynamic properties of protruded natural fibre reinforced composites using Split Hopkinson Pressure Bar technique. Materials & Design, 2010, 31: 4209-4218.
  • 3Naik,N.K., Venkateswara,R.K., Veerraju,C. and Ravikumar,G., Stress-strain behavior of composites under high strain rate compression along thickness direction: Effect of loading condition. Materials & Deaign, 2010, 31: 396-401.
  • 4Liu,W.D. and Liu,K.X., Mechanical behavior of a Zr-based metallic glass at elevated temperature under high strain rate. Journal of Applied Physics, 2010, 108: 033511.
  • 5Lee,W.S. and Lin,C.F,, Plastic deformation and fracture behaviour of Ti-6A1-4V alloy loaded with high strain rate under various temperatures. Materials Science and Engineerin9 A, 1998, 241: 48-59.
  • 6Seo,S., Min,O. and Yang,H., Constitutive equation for Ti-6A1-4V at high temperatures measured using the SHPB technique. International Journal of Impact Engineering, 2005, 31: 735-754.
  • 7Nemat-Nasser,S. and Isaacs,J.B., Direct measurement of isothermal flow stress of metals at elevated tem- peratures and high strain rates with application to Ta and Ta-W alloys. Acta Materialia, 1997, 45: 907-919.
  • 8Lennon,A.M. and Ramesh,K.T., A technique for measuring the dynamic behavior of materials at high temperatures. International Journal of Plasticity, 1998, 14: 1279-1292.
  • 9Bariani,P.F., Berti,G. and Corazza,S., Enhancing performances of SHPB for determination of flow curves. CIRP Annals-Manufacturing Technology, 2001, 50: 153-156.
  • 10Chiddister,J. and Malvern,L., Compression-impact testing of aluminum at elevated temperatures. Exper- imental Mechanics, 1963, 3: 81-90.

同被引文献52

引证文献7

二级引证文献54

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部