期刊文献+

基于ARM11和WinCE的温室大棚嵌入式监控系统设计 被引量:12

Design of Embedded Monitoring System for Greenhouse Based on ARM11 and WinCE
下载PDF
导出
摘要 针对人工控制准确率低、过程繁杂等问题,文中设计和实现了一种基于ARM11嵌入式和WinCE操作系统的温室大棚智能监控系统。该系统主要由无线传感器数据采集系统、嵌入式终端、驱动电路和执行部件组成,实时采集大棚内的温湿度数据,通过对大棚内风机、卷帘和喷淋器的控制实现温、湿度的自动调节。通过温室大棚实地测试表明,该系统操作简单实用,运行稳定,有助于减轻劳动强度,提高效率。 According to the problem that manual controlling process for greenhouse is complicated and low accuracy,this paper designed and implemented an intelligent temperature and humidity monitoring system for greenhouse based on ARM11 embedded device and WinCE operating system.This system consisted of wireless sensor,embedded device,drive circuit and execution units.It collected the temperature and humidity of the greenhouse,then controlled the fan,mechanical shutter and sprinkler to regulate the temperature and the humidity.Practical application shows that the system is simple,high reliability,and helpful to reduce farmers' labor and increase efficiency.
作者 许明 闫旻
出处 《仪表技术与传感器》 CSCD 北大核心 2013年第3期88-90,共3页 Instrument Technique and Sensor
关键词 ARM11嵌入式 WINCE操作系统 温室大棚 ARM11 embedded system WinCE operating system greenhouse
  • 相关文献

参考文献6

二级参考文献26

共引文献102

同被引文献83

  • 1宋飞,冯复科.停车场安全监控系统[J].西安文理学院学报(自然科学版),2006,9(1):102-105. 被引量:2
  • 2周立功.ARM嵌入式系统基础教程[M].北京:北京航空航天大学出版社,2007.
  • 3姜秉梁,蔡振江,高丽艾,王福顺.基于触摸屏的全自动矽钢片剪切机的设计[J].微计算机信息,2007,23(22):83-84. 被引量:2
  • 4汤字.基于ZigBee的智能停车场系统研究[D].大庆:东北石油大学,2011.
  • 5Li Xiangyang, Zhang Weiqiang, Hu Jing. Design of Intelligent Home Applimlce Control System Based on ARM and ZigBee[ C ]// The International Confereneeon Consumer Electronics,Communica- tions and Networks( CECNet2011 ) ,Xianning,2012.
  • 6Hofnmnn C,Weigand C,Bemhard J. Evaluation of Zigbee for Medical Sensor Networks [ J ]. WSEAS Trans Electr ,2006 ,3 (3) : 121-125.
  • 7彭吉崇.基于ZigBee技术停车场车位的组网与通信设计[D].哈尔滨:哈尔滨理工大学,2012.
  • 8KANG Beom Jin,PARK DaeHeon.A study on the greenhouse auto control system based on wireless sensor network[J].International Conference on Security Technology,2008(4):41-44.
  • 9刘方,栗震霄.我国农业温室控制系统控制模式的研究[J].农机化研究,2008,30(10):223-226. 被引量:24
  • 10赵晓江,冯萍.触摸屏组态软件的PLC驱动程序的实现[J].西北大学学报(自然科学版),2008,38(2):221-224. 被引量:3

引证文献12

二级引证文献53

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部