摘要
针对某含铜难处理金精矿,研究了焙烧—酸浸—氰化提金工艺,获得了优化工艺条件。结果表明,在焙烧温度为540℃,焙烧时间2 h,焙砂在初酸浓度为30 g/L、液固比3∶1,浸出温度90℃,浸出时间1.5 h的条件下,Cu浸出率>95%,酸浸渣铜品位可降至0.3%以下;脱铜渣在NaCN浓度为4‰、矿浆浓度为30%,氰化时间24 h的条件下,Au浸出率达96%以上,实现了Au和Cu的高效回收。
Focusing on refractory gold concentrate containing copper,the technology of roasting-acid leaching- cyanidation was studied and the optimized condition was obtained.Experimentation results show that Cu leaching rate is above 95% and copper grade of acid-leach residue is low of 0.3% when concentrate roasted 2 hours at temperature of 540 ℃,roasted product is leached with sulfuric acid of 30 g/L under conditions of 3 of liquid-solid ratio, 90 ℃ of temperature and time of 1.5 hours.The recovery rate of Au is above 96% when decoppering slag is leached with the densities of sodium cyanide of 4%0 under conditions of 30% of pulp density and time of 24 hours. This process realizes recovery Au and Cu in high efficiency.
出处
《黄金科学技术》
CSCD
2013年第2期82-85,共4页
Gold Science and Technology
基金
国家"973计划"课题"黄金
钒钛等资源综合利用相关科学问题研究"(编号:2010CB735501)
福建省区域重大项目"多金属共伴生难处理金精矿综合利用关键技术研究"(编号:2011H4025)联合资助
关键词
含铜金精矿
焙烧
酸浸
预处理
氰化
Gold concentrate containing copper
Roasting
Acid leaching
Pretreatment
Cyanidation