期刊文献+

Two-dimensional analyses of delamination buckling of symmetrically cross-ply rectangular laminates 被引量:5

Two-dimensional analyses of delamination buckling of symmetrically cross-ply rectangular laminates
下载PDF
导出
摘要 The conventional approach to analysis the buckling of rectangular laminates containing an embedded delamination subjected to the in-plane loading is to simplify the laminate as a beam-plate from which the predicted buckling load decreases as the length of the laminate increases. Two-dimensional analyses are employed in this paper by extending the one-dimensional model to take into consideration of the influence of the delamination width on the buckling performance of the laminates. The laminate is simply supported containing a through width delamination. A new parameterβ defined as the ratio of delamination length to delamination width is introduced with an emphasis on the influence of the delamination size. It is found that (i) when the ratio β is greater than one snap-through buckling prevails, the buckling load is determined by the delamination size and depth only; (ii) as the ratio β continues to increase, the buckling load will approach to a constant value. Solutions are verified with the well established results and are found in good agreement with the latter. The conventional approach to analysis the buckling of rectangular laminates containing an embedded delamination subjected to the in-plane loading is to simplify the laminate as a beam-plate from which the predicted buckling load decreases as the length of the laminate increases. Two-dimensional analyses are employed in this paper by extending the one-dimensional model to take into consideration of the influence of the delamination width on the buckling performance of the laminates. The laminate is simply supported containing a through width delamination. A new parameterβ defined as the ratio of delamination length to delamination width is introduced with an emphasis on the influence of the delamination size. It is found that (i) when the ratio β is greater than one snap-through buckling prevails, the buckling load is determined by the delamination size and depth only; (ii) as the ratio β continues to increase, the buckling load will approach to a constant value. Solutions are verified with the well established results and are found in good agreement with the latter.
出处 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2013年第5期597-612,共16页 应用数学和力学(英文版)
基金 supported by the National Natural Science Foundation of China(Nos.11172113,11032005,and 11072037)
关键词 two-dimensional analysis rectangular laminate DELAMINATION BUCKLING laminate theory two-dimensional analysis rectangular laminate delamination buckling laminate theory
  • 相关文献

参考文献25

  • 1Chai, H., Babcock, C. D., and Knauss, W. G. One dimensional modelling of failure in laminated plates by delamination buckling. International Journal of Solids and Structures, 17(11), 1069- 1083 (1981).
  • 2Simitses, G. J., Sallam, S., and Yin, W. L. Effect of delamination of axially loaded homogeneous laminated plates. AIAA Journal, 23(9), 1437-1444 (1985).
  • 3Yazdi, A. A. and Rezaeepazhand, J. Structural similitude for flutter of delaminated composite beam-plates. Composite Structures, 93, 1918-1922 (2011).
  • 4Gu, H. and Chattopadhyay, A. An experimental investigation of delamination buckling and post?buckling of composite laminates. Composites Science and Technology, 59, 903-910 (1999).
  • 5Nilsson, K. F., Thesken, J. C., Sindelar, P., Giannqkopoulos, A. E., and Stoakers, B. A theoretical and experimental investigation of buckling induced delamination growth. Journal of the Mechanics and Physics of Solids, 41(4), 783-807 (1993).
  • 6Parlapalli, M. and Shu, D. Buckling analysis of two-layer beams with an asymmetric delamination. Engineering Structures, 26, 651-658 (2004).
  • 7Karihaloo, B. L. and Stang, H. Buckling-driven delamination growth in composite laminates: guidelines for assessing the threat posed by interlaminar matrix delamination. Composites: Part B Engineering, 39, 386-395 (2008).
  • 8Gilate, R., Williams, T. 0., and Aboudi, J. Buckling of composite plates by global-local plate theory. Composites: Part B Engineering, 32, 229-236 (2001).
  • 9Bruno, D. and Greco, F. Mixed mode delamination in plates: a refined approach. International Journal of Solids and Structures, 38(50-51),9149-9177 (2001).
  • 10Barbero, E. J. and Reddy, J. N. Modeling of delamination in composite laminates using a layer?wise plate theory. International Journal of Solids and Structures, 28(3), 373-388 (1991).

同被引文献88

引证文献5

二级引证文献35

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部