期刊文献+

炭黑品种对三元乙丙橡胶/氯化聚乙烯橡胶并用胶性能的影响 被引量:10

Effects of Carbon Black Type on Properties of EPDM/CM Blends
下载PDF
导出
摘要 研究炭黑品种对三元乙丙橡胶/氯化聚乙烯橡胶并用胶性能的影响。结果表明:随着炭黑粒径的减小和结构度的增大,并用胶的动态力学性能和物理性能呈现上升趋势,炭黑N330为并用胶的最佳补强炭黑。新型炭黑CD2110的粒径与炭黑N234相当,与炭黑N234相比,炭黑CD2110填充的并用胶Payne效应较强,硫化速率相当,并用胶的定伸应力、拉伸强度和撕裂强度均增大,耐磨性能和耐热氧老化性能也明显提高。 The effects of carbon black type on the properties of EPDM/CM blends were investiga-ted. The results showed that, as the particle size of carbon black decreased and structure degree in-creased, the dynamic property and physical properties of the blends were improved, and carbon black N330 was the best reinforcing carbon black for the blends. The new type carbon black CD2110 had similar particle size as carbon black N234. Compared with carbon black N234,the Payne effect of car-bon black CD2110 filled blend was stronger, the modulus, tensile strength and tear strength increased, and the wear resistance and thermo-oxidative aging resistance were also improved.
出处 《橡胶工业》 CAS 北大核心 2013年第5期284-288,共5页 China Rubber Industry
关键词 炭黑 三元乙丙橡胶 氯化聚乙烯橡胶 并用胶 补强 carbon black EPDM CM blend reinforcement
  • 相关文献

参考文献5

  • 1张士齐,贾红兵,刘卫东.填料-橡胶的化学和物理作用及其对补强的影响[J].橡胶工业,2003,50(4):201-204. 被引量:21
  • 2Ramier J,Gauthier C,Chazeau L,et al. Payne Effect in Silica-filled Styrene-Butadiene Rubber: Influence of Suface Treat-ment[J]. Journal of Applied Polymer Science,2006,45 ( 3):286-298.
  • 3Wu G,Asai S,Sumita M, et al. Estimation of FlocculationStructure in Filled Polymer Composites by Dynamic Rheolo-gical Measurements[J]. Colloid and Polymer Science,2000,278(3):220-228.
  • 4Kluppel M, Schuster R H. Stucture and Properties ofReinforcing Fractal Filler Networks in Elastomers [ J].Rubber Chemistry and Technology,1997,70(22) : 243-255.
  • 5Drozdov A D,Dorfmann A. The Payne Effect for Particle-reinforced Elastomers[J]. Polymer Engineering and Science,2002,42(3):591-604.

二级参考文献3

共引文献20

同被引文献138

  • 1杨坤彪,赵付彬,宗成中.不同炭黑补强EPDM/NR再生胶共混胶的性能研究[J].特种橡胶制品,2012,33(3):25-28. 被引量:3
  • 2李帅,赵洪玲,宋现芬,杜芳林,王兆波.炭黑增强SBR/EVA/HIPS热塑性硫化胶的性能研究[J].特种橡胶制品,2012,33(6):1-4. 被引量:8
  • 3莫贤科,周明松,楼宏铭,杨东杰,邱学青.酶解木质素/炭黑复合补强体系对丁腈橡胶的补强性能[J].高分子材料科学与工程,2015,31(1):51-56. 被引量:8
  • 4栗娟,辛振祥.氯化聚乙烯硫脲硫化体系配方优化[J].合成橡胶工业,2007,30(5):358-361. 被引量:7
  • 5Phewphong P,Saeoui P,Sirisinha C. Mechanism of Silica Re- inforcement in CPE/NR Blends by the Use of Rheologieal Approaches[J]. Journal of Applied Polymer Science,2008,7 (4) :2638-2645.
  • 6Allahbakhsh A, Mazinani S, Kalaee M R, et al. Cure Kinetics and Chemorheology of EPDM/Graphene Oxide Nanocomposites[J], Thermochimica Acta,2013,563:22-32.
  • 7Ismail H, Mathlalagan M. Comparative Study on the Effect of Partial Replacement of Silica or Calcium Carbonate by Bentonite on the Properties of EPDM Composites [J]. Polymer Testing,2012,31(2):199-208.
  • 8Zhou Yabin, Wang Shifeng, Zhang Yinxi, et al. Reinforcement Effect of MAA on Nano-CaCO3-filled EPDM Vulcanizates and Possible Mechanism[J]. Journal of Polymer Science Part B:Polymer Physics,2006,44(8):1226-1236.
  • 9Argby S, Saber N, Ma X, et al. Implication of Multi-walled Carbon Nanotubes on Polymer/Graphene Composites[J]. Materials and Design,2015,65(10):690-699.
  • 10Akhlaghi S, Kalaee M, Mazinani S, et al. Effect of Zinc Oxide Nanoparticles on Isothermal Cure Kinetics, Morphology and Mechanical Properties of EPDM Rubber[J]. Thermochim Acta,2012,527:91-98.

引证文献10

二级引证文献30

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部