摘要
针对胶层与螺栓可以协调变形的胶-螺混合连接接头,通过理论分析与实验对比的方法,研究了胶层厚度、螺栓位置、螺栓刚度等参数对胶-螺混合接头承载力的影响规律与机理,分析了现有承载力计算公式的适用范围。研究结果表明,接头相关几何力学参数的变化将影响接头的破坏形式和承载力,现有承载力计算方法有一定的适用范围。
Theoretical and experimental analyses were performed on the effects of the adhesive layer thickness, the bolt location and the bolt rigidity on bearing capacity of bonded-bolted hybrid joints with bonded-bolted deforma- tion harmony. The valid range of the calculation formula for bearing capacity was discussed. It is founded that the varying of the related geometrical and mechanic parameters influence the failure mode and the bearing capacity and the current calculation method is limited.
出处
《玻璃钢／复合材料》
CAS
CSCD
北大核心
2013年第3期66-71,共6页
Fiber Reinforced Plastics/Composites
基金
国家支撑计划(2012BAK05B00)
关键词
复合材料
胶-螺混合连接接头
影响因素
胶-螺变形协调条件
承载力
composites
bonded-bolted hybrid joint
influence factor
bonded-bolted deformation harmonycondition
bearing capacity
