期刊文献+

玻璃隔热涂料隔热性能的影响因素研究 被引量:1

STUDY ON THE THERMAL INSULATION FACTORS OF THERMAL INSULATED GLASS PAINT
下载PDF
导出
摘要 通过紫外、可见、近红外分光光度计对涂膜隔热玻璃进行光热性能检测,探讨玻璃隔热涂料隔热性能的影响因素,如玻璃隔热涂料中纳米ATO浆料的含量、涂膜厚度、纳米ATO隔热浆料的固含量及平均粒径等,特别是纳米ATO粒径由73.9nm降至36.9nm时,近红外阻隔率提升了约10%。通过分析玻璃隔热涂料隔热性能影响因素的变化规律,优化了玻璃隔热涂料的制备工艺。 Optical and thermal performance of thermal insulation coating glass was analyzed with UV-VIS-NIR spectrophotometer. The factors on thermal insulation performance of glass paint were discussed, such as different solid contents of ATO slurry, wet coating thickness, and mean particle size of ATO slurry. When the nano ATO mean particle size dropped from 73.9nm to 36.9nm, the ability of blocking NIR was improved by 10%. By analyzing the basic law of thermal insulation factors, the preparation procedure of thermal insulated glass paint was optimized.
作者 李宁 孟庆林
出处 《太阳能学报》 EI CAS CSCD 北大核心 2013年第5期810-813,共4页 Acta Energiae Solaris Sinica
基金 中国博士后科学基金(2012M511809) 粤港关键领域重点突破项目(2004A30310001)
关键词 玻璃隔热涂料 隔热性能 纳米ATO浆料 近红外线 thermal insulated glass paint thermal insulation performance nano ATO slurry NIR
  • 相关文献

参考文献5

二级参考文献22

  • 1Mauro Epifani, Maro Alvisi, Gabriella Leo, et al. Sol-gel processing and characterization of pure and metal-doped SnO2 thin film [J]. J Am Ceram Soc, 2001, 84(1): 48-54.
  • 2Leen Seung-Chul, Lee Jae-Ho, Oh Tae-Sung, et al, Fabrication of tin oxide .lm by sol-gel method for photovoltaic solar cell system [J]. Solar Ene Mater Solar Cells, 2003, 75: 481-187.
  • 3Terrier C, Chatelon J P, Roger J A, et al, Analysis of antimony doping in tin oxide thin films obtained by the sol-gel method [J]. J Sol-Gel Sci Technol, 1997, 10: 75-81.
  • 4Park S S, Mackenzie J D.Thickness and microstructure effects on alcohol sensing of tin oxide thin films [J]. Thin Solid Films, 1996, 274: 154-159.
  • 5Takahashi Y, Wada Y. Dip-coating of Sb doped SnO2 films by ethanol-lamine-alkoxide method [J]. J Electtrochem Soc, 1990, 137: 267-272.
  • 6Orel B, Lavrencic U, Crnjak Z, et al. Structral and FTIR spectroscopic studies of gel-xerogel-oxide transitions of SnO2 and SnO2:Sb powders and dip-coated films prepared via inorganic sol-gel route [J]. Thin Solid Film, 1994, 167: 272-288.
  • 7Marco A, Luciana M, Gabriella L, et al. Sol-Gel processing and characterization of pure and metal-doped SnO2 thin films [J]. J Am Ceram Soc, 2001, 84(1): 48-54.
  • 8Rella R, Serra A, Siciliano P, et al. Tin oxide-based gas sensors prepared by the sol-gel process [J]. Sens Actuat B, 1997, 44: 462-467.
  • 9H Bisht, et al. Comparison of Spray Pyrolyzed FTO, ATO and ITO Coatings for Flat and Bent Glass Substrates. Thin Solid Films.1999, (351):109-114
  • 10Y Ishihara, et al. Applications of the Particle ordering Technique for Conductive Anti - reflection Films. Thin Solid Films. 2002, (411):50 - 55

共引文献56

同被引文献8

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部