Minimizing Air Entrainment in the Shot Sleeve during Injection Stage of the HPDC Machine
Minimizing Air Entrainment in the Shot Sleeve during Injection Stage of the HPDC Machine
出处
《材料科学与工程（中英文A版）》
2013年第3期153-161,共9页
Journal of Materials Science and Engineering A
关键词
注射过程
压铸机
拍摄
空气
液态金属流
夹带
三维数值模型
动量守恒方程
Pressure die casting machine, slow injection phase, plunger acceleration law, shot sleeve wave dynamics, air entrapment.
参考文献20
-
1J.R. Brevick, M. Duran, Y. Karni, Experimental determination of slow shot velocity position profile to minimize air entrapment, in: Transactions of 16th International Die Casting Congress and Exposition, Detroit., 1991, pp. 399-404.
-
2F. Faura, J. Lopez, 1. Hernandez, On the optimum plunger acceleration law in the slow shot phase of pressure die casting machines, Int. 1. Machine Tools Manuf. 41 (2) (2001) 173-191.
-
3L. W. Garber, Theoretical analysis and experimental observation of air entrapment during cold chamber filling, Die Cast. Engineer 26 (1982) 14-22.
-
4T.e. Tszeng, Y.L. Chun, A Study of wave formation in shot sleeve of a die casting machine, Report No. ERCINSM-C-92-01, The Ohio State University, 1992.
-
5M.C. Thome, J.R. Brevick, Modeling fluid flow in horizontal cold chamber die casting shot sleeves, Trans. Am. Foundry Men's Soc. 102 (1993) 343-348.
-
6M. Duran, Minimization of air entrapment in the shot sleeve of a die casting machine to reduce porosity, Report No. ERCINSM-C-91-31, The Ohio State University, 1991.
-
71. Rosindale, K. Davey, Transient thermal model for the hot chamber injection system in the pressure die casting process, Applied Mathematical Modelling 23 (1999) 255-277.
-
8M.R. Barone, D.A. Caulk, Analysis of liquid metal flow in die casting, International Journal of Engineering Science 38 (2000) 1279-1302.
-
9C.G. Kang, P.K. Seo, S.S. Kang, The effect of injection velocity on liquid segregation and mechanical properties in arm part fabricated by semi-solid die casting process, Journal of Materials Processing Technology 176 (2006) 32-40.
-
10L. Yuan, S. Xiong, B. Liu, M. Masayuki, M. Yoshihide, I. Shingo, Numerical simulation and optimization of liquid metal flow in the shot sleeve of cold chamber die casting process, in: Modeling of Casting, Welding and Advanced Solidification Processes 11 th, 2006, pp. 111-118.
-
1吴勃,王匀,王霄,蔡兰.铸态高强度耐磨铝青铜正交切削过程研究[J].机械设计与制造,2014(4):18-20. 被引量：1
-
2孙锋,段先进,崔华,张济山,陈国良.导流管中液态金属热传输的数值分析[J].北京科技大学学报,1997,19(1):68-74. 被引量：1
-
3张志函,李文亚,韩静,李京龙.Numerical analysis of joint temperature evolution during friction stir welding based on plastic deformation heat[J].China Welding,2011,20(1):76-80. 被引量：2
-
4淮凯文,郭建亭,高强,杨锐.Microstructure and mechanical properties of Nb-doped NiAl-Cr(Mo) eutectic prepared by injection casting[J].中国有色金属学会会刊：英文版,2005,15(S3):94-98. 被引量：1
-
5张昭,张洪武.搅拌摩擦焊接技术实现非直线焊缝过程中的材料行为分析[J].塑性工程学报,2006,13(3):108-114. 被引量：4
-
6Wei WU,Yan ZHANG,Feng LI,ZHENG Liu.An optimization of injecting system in die casting[J].China Foundry,2005,2(2):112-116. 被引量：1
-
7余海洪,骆珊,龙文元,王东成.对流作用下二元合金枝晶生长的相场法模拟[J].热加工工艺,2010,39(18):50-54. 被引量：2
-
8史永东.液态金属流的表面张力问题中的两点边值问题解的存在性[J].数学学报（中文版）,1998,41(5):1069-1074.
-
9D.G.LEES,R.FRANCIS.Evidence for Vacancy Injection during the Oxidation of Iron[J].中国腐蚀与防护学报,2009,29(4):293-295.
-
10林丽珊.线壳盖塑料模具设计[J].机械研究与应用,2010,23(1):79-80. 被引量：1
