摘要
利用LS-DYNA显示动力分析有限元程序,采用流固耦合方法,对带尾翼EFP的形成过程进行数值模拟。结果表明:该装药结构能形成带有8个尾翼的EFP,带尾翼EFP的长径比是EFP长径比的2.23倍,其头部速度比EFP增加了15%。
Numerical simulation of the forming process of the fin adhered EFP was carried out with the ALE method using LS DYNA. The result indicates that such a charge structure can form EFP with eight fins,the length diameter ratio of EFP with fins is 2.23 times than that of EFP without fins,and velocity increases by 15 percent.
出处
《兵器材料科学与工程》
CAS
CSCD
北大核心
2013年第3期83-85,共3页
Ordnance Material Science and Engineering
关键词
爆炸力学
爆炸成型弹丸(EFP)
尾翼
数值模拟
explosive mechanics
explosively formed projectile(EFP)
fin
numerical simulation