杭州客站宽轨枕路基处理的设计与施工
摘要
通过对杭州站多种形式路基处理的方法与实践,探索在深基坑回填和普通路基上一次铺成宽轨枕轨道的新途径、新方法。
出处
《路基工程》
2000年第5期56-59,共4页
Subgrade Engineering
参考文献6
-
1袁鹏,孟庆鑫,王立权,瞿晓荣,王沫楠,于艳爽.两栖仿生机器蟹单足运动控制系统[J].制造业自动化,2003,25(7):38-40. 被引量:2
-
2袁鹏,孟庆鑫,王沫楠,瞿晓荣,于艳爽.两栖仿生机器蟹的单足路径规划和生成[J].哈尔滨工程大学学报,2003,24(3):296-301. 被引量:5
-
3赵铁石,赵永生,黄真.仿蟹步行机构模型灵活度分析[J].中国机械工程,1998,9(3):52-54. 被引量:19
-
4刘正士.机器人六分量腕力传感器加载试验台系统误差分析[J].计量学报,1998,19(1):44-50. 被引量:11
-
5熊有伦.机器人力传感器的各向同性[J].自动化学报,1996,22(1):10-18. 被引量:35
-
6[英]特雷尔 著,和佩青.数字滤波器引论[M]清华大学出版社,1986.
二级参考文献23
-
1查选芳,张融甫.多足步行机器人腿机构的运动学研究[J].东南大学学报(自然科学版),1995,25(2):103-107. 被引量:7
-
2赵铁石,赵永生,李晨霞,黄真.海蟹足系仿生机构模型及位置反解[J].东北重型机械学院学报,1996,20(1):10-14. 被引量:6
-
3RANDALL M J, PIPE A G. An intelligent control architechture and its application to walking robots[ A]. International Workshop on Advanced Robtics and Intelligent Machines[C]. 1997.
-
4FIELDING M R, DUNLOP R. Hamlet: force/position controlled hexapod walker design and system, http://www. hamlet, canterbury, ac. nz.
-
5RANDALL M J, PIPE A G. An intelligent control architechture and its application to walking robots[J]. International Workshop on Advanced Robtics and Intelligent Machines,25-26 March 1997,UK.
-
6MICHAEL R F, REG Dunlop. Hamlet:Force/Position controlled hexapod walker design and system[EB/OL].www.hamlet.canterbury.ac.nz.
-
7TMS320LF/LC240X DSP Controllers system and peripherals reference guide(literrature number SPRU357)[Z].TexasInstruments,2000.
-
8熊有伦,机械人学.力学、控制和编程,1993年
-
9Li Z X,IEEE J of Robotics and Automation,1988年,14卷,1期,32页
-
10赵铁石,机械工业的未来,1996年
共引文献61
-
1张韬,肖心怡,杨德华,吴常铖.基于各向同性的Stewart型六维力传感器的优化设计[J].Transactions of Nanjing University of Aeronautics and Astronautics,2020(S01):102-108.
-
2王沫楠,孟庆鑫,王京权.仿生机器蟹步行腿结构设计及运动学、动力学分析[J].制造业自动化,2003(z1):165-169.
-
3赵延治,鲁超,赵铁石.一种新型过约束12-SS并联六维力传感器的数学模型与仿真计算[J].新型工业化,2013,2(9):64-72.
-
4王沫楠.仿生机器蟹机构设计及结构参数优化[J].机械与电子,2004,22(8):37-40. 被引量:5
-
5金振林,张晓辉,高峰.Stewart型指尖力传感器结构尺寸对其灵敏度的影响研究[J].计量学报,2004,25(3):262-265. 被引量:7
-
6高峰,陈玉龙,彭斌彬,李为民,张建军.新型解耦和各向同性五维力传感器性能分析[J].机械工程学报,2004,40(9):71-74. 被引量:8
-
7郑红梅,刘正士,王勇.机器人六维腕力传感器标定方法和标定装置的研究[J].计量学报,2005,26(1):43-45. 被引量:19
-
8吴明阳,孟庆鑫,王沫楠.仿生机器蟹系统设计研究[J].林业机械与木工设备,2005,33(4):32-35. 被引量:2
-
9贾红宇.八足步行机器人参数的仿真计算[J].计算机仿真,2005,22(3):165-167. 被引量:2
-
10吴明阳,孟庆鑫,王沫楠.电机驱动型两栖仿生机器蟹步行腿研究[J].电机与控制学报,2005,9(4):307-310. 被引量:1
-
1谢俊伟,吴宁.深圳市厂拌热再生沥青混合料的设计方法与实践总结[J].城市道桥与防洪,2009(4):32-34.
-
2李峰,孙立军,胡晓.长寿命沥青路面设计方法与实践综述[J].公路,2005,50(7):122-127. 被引量:37
-
3葛胜锦,王学军.山区高速公路桥梁的设计方法与实践[J].公路,2008,53(9):237-244. 被引量:29
-
4刘明金,刘毅,刘晓英.连续箱梁现浇施工中裂缝控制的方法与实践[J].江西公路科技,2004(2):32-33.
-
5李玲桂.德国的宽轨枕轨道[J].铁道知识,2004(2):16-16. 被引量:2
-
6宁金成,李嘉.二灰碎石施工质量控制的方法与实践[J].河南科学,2002,20(4):428-431.
-
7皇甫风雷,周利琴.道路工程中石屑夹砂回填深基坑施工方法[J].北方交通,2015(9):86-88. 被引量:3
-
8游精佑.提高既有线混凝土梁承载能力的方法与实践[J].铁道建筑,2001,41(4):2-5.
-
9郑育彬,冯伟.贵州公路:省道网规划调整的方法与实践[J].综合运输,2014,36(1):25-29. 被引量:1
-
10徐欢,黄峰.公路工程二灰碎石基层施工质量控制的方法与实践[J].科技致富向导,2012(12):170-170. 被引量:2