摘要
设计了一种水稻植质钵育秧盘精量播种机,对影响播种机播种精度的关键参数进行了试验和优化。该机每穴播种3~5粒,一次作业能够完成覆底土、播种以及覆表土等播种作业。经过对该播种机的试验和检测表明:播种均匀度达到98.2%,空穴率为0.01%,单粒率为零,播种生产率为420盘/h,各项指标均达到水稻植质钵育秧盘播种的要求。
A kind of precision seeder for rice seedling-growing tray made of paddy-straw was developed. The key factors which had effect on seeder sowing accuracy were tested and optimized. The proposed seeder could sow 3 -5 seeds in each holl and accomplish subsoil covering, seeds sowing, topsoil covering and other processes in one working time. The results showed that sowing uniformity was 98.2% , the ratio of cavity was 0.01% , single grain was 0, and seed production rate was 420 trays per hour, which met the requirements of rice seedling-growing tray made of paddy-straw seeding.
出处
《农业机械学报》
EI
CAS
CSCD
北大核心
2013年第6期56-61,共6页
Transactions of the Chinese Society for Agricultural Machinery
基金
国家农业科技成果转化资助项目(2009GB2B200101)
'十一五'国家科技支撑计划资助项目(2006BAD28B01-3)
黑龙江省重大推广专项资助项目(TA09Q406)
高等学校博士学科点专项科研基金资助项目(20112305120003)
农业部农产品质量监督检验测试中心博士后科研工作站(大庆)资助项目(LRB11-413)
关键词
水稻
植质钵育秧盘
播种机
设计
试验
Rice Seedling-growing tray made of paddy-straw Seeder Design Test