摘要
Mullite whiskers were facilely prepared by sintering kyanite at high temperature, with the addition of AlF3·3H20. The as-prepared whiskers have been characterized systematically in terms of phase composition, morphology, and structure. Results showed that the morphology and size of mullite whiskers were strongly depended on the content of AlF3·3H20 and sintering temperature. At temperatures in the range of 1 100 to 1 500 ℃ with 4 wt% addition of AlF3·3H20, the well-shaped mullite whiskers were obtained. For an instance, the mullite whiskers with 5-10 μm in length and 0.1-0.2 μm in cross-section could be formed at 1 400 ℃, with 4 wt% addition of A1F3·3H20. Moreover, results showed that the addition of mullite whiskers into ceramic matrix enhanced its fracture toughness significantly.
Mullite whiskers were facilely prepared by sintering kyanite at high temperature, with the addition of AlF3·3H20. The as-prepared whiskers have been characterized systematically in terms of phase composition, morphology, and structure. Results showed that the morphology and size of mullite whiskers were strongly depended on the content of AlF3·3H20 and sintering temperature. At temperatures in the range of 1 100 to 1 500 ℃ with 4 wt% addition of AlF3·3H20, the well-shaped mullite whiskers were obtained. For an instance, the mullite whiskers with 5-10 μm in length and 0.1-0.2 μm in cross-section could be formed at 1 400 ℃, with 4 wt% addition of A1F3·3H20. Moreover, results showed that the addition of mullite whiskers into ceramic matrix enhanced its fracture toughness significantly.
