摘要
通过对实验结果的分析 ,探讨了脱硫和产物回收相结合的可行性 .脉冲放电脱硫的同时 ,对产物有一定收集作用 ,收集效果随脉冲电压峰值、脉冲重复频率和烟气停留时间的增加而提高 ,与脱硫效果随上述参数的变化相一致 .给反应器加直流基压可有效收集脱硫产物 ,收集效率随直流基压和停留时间增加而增大 ,最高可达 95.
Experimental study is made on the feasibility of the combination of the products collection and SO 2 removal. Certain effect of products′ collection is obtained in the process of SO 2 removal by pulse corona discharge. The collection efficiency rises with increasing resident time, the peak value and pulse frequency, which is consistent with the variety of SO 2 removal efficiency according to the aforementioned parameters. Collection of SO 2 removal products is effectively obtained by adding DC bias voltage to pulse corona discharge reactor. The collection efficiency rises with increasing DC bias voltage and resident time. The collection efficiency is up to 95.1% in the devices used.
出处
《大连理工大学学报》
CAS
CSCD
北大核心
2000年第1期37-39,共3页
Journal of Dalian University of Technology
基金
国家"九五"重点科技攻关项目 !(96 - 91 0 - 0 2 - 0 1 )
关键词
脱硫
脉冲放电
产物收集
空气
二氧化硫
desulfurization/pulse corona discharge
products collection
DC bias voltage