冶金焦代替煅后焦作为阳极焙烧填充料可行性探讨

Discussion on feasibility of using metallurgical coke instead of calcined coke as filling material of anode baking

对采用成本相对较低的冶金焦代替煅后焦作为预焙阳极焙烧填充料的可行性进行了研究,考察了冶金焦作填充料后焙烧工艺的状况、焙烧块的理化指标等。

The feasibility of using relatively low cost metallurgical coke instead of calcined coke as filling material of pre-baked anode baking was studied. The baking process conditions and the physical and chemical parameters of baking carbon block after using metallurgical coke as filling material were investigated.