期刊文献+

化机浆配抄化学浆纸页相对结合面积的研究 被引量:2

A study on relative bonded area of CTMP furnished with chemical pulp
下载PDF
导出
摘要 采用氮气吸附法和光散射系数法,分别研究了化机浆与针叶木和阔叶木化学浆配抄纸页的相对结合面积,研究结果表明:与光散射系数法相比较,氮气吸附法测定的纸页相对结合面积低;纤维的比表面积是影响相对结合面积的主要因素;随着化机浆配比增加,纸页的相对结合面积降低;随着打浆度的增加,纸页的相对结合面积增加。 In this paper was investigated the relative bonded area (RBA) of CTMP furnished with softwood and hardwood chemical pulp, RBA was determined with nitrogen adsorption method and light scattering coefficient method respectively. The result shows that the relative bonded area determined with nitrogen adsorption method is lower comparing with light scattering coefficient method. Fiber specific surface area plays a predominate role in sheet RBA. RBA decreases with an increase in CTMP ratio and increases with an increase in pulp refining degree.
作者 王宝玉 李荣
出处 《中华纸业》 CAS 2013年第12期33-36,共4页 China Pulp & Paper Industry
关键词 比表面积 光散射系数 相对结合面积 化机浆 化学浆 specific surface area light scattering coefficient relative bonded area CTMP chemical pulp
  • 相关文献

参考文献6

  • 1Skowronske J, Eichard W. Fiber to fiber bonds in paper, part I measurement of bonds strength and specific bond strength[J]. J. Pulp Paper Sic., 1987,15(5):J165-169.
  • 2Koubaa A, Kiran Z. Measure of the internal bond strength of paper/board[J]. Tappl J., 1995,78(3),103-111.
  • 3Swanson J W, Sterber A J. Fiber surface area and bonded area[J]. Tappi J., 1959,4202)986-994.
  • 4Gurnagul N S, Page D H. Fibre--fibre bond stren6th of once dried pulps[J]. Journal of Pulp and Paper Science, 2001, 27(3):88-91.
  • 5Stratton R A. Oharacterization of fiber--fiber bond strength from out of plane paper mechanical properties[J]. Journal of Pulp and Paper Science, 1995,19(1).6-12.
  • 6Haselton W E. Gas adsorption by wood, pulp and paper. II The application of gas adsorption techniques to the study of area and structure of pulps and the unbonded arid bonded atea of paper[J]. Tappi J., 1955,38(12).716-723.

同被引文献18

引证文献2

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部