摘要
利用S形电磁带隙结构的阻波特性,设计了一种基于EBG结构的基片集成波导(SIW)超宽带带通滤波器。该滤波器通过将不同大小的S形结构单元蚀刻在SIW上金属面,以获得超宽带。所设计的带通滤波器工作频带范围为7.85~10.21GHz,中心频率为9.03GHz,相对带宽为26.14%,通带内的最大插入损耗约为1.54dB,相比于文献[8~10]中类似EBG结构的带通滤波器,回波损耗较优,且具有结构紧凑、通带选择性好等优点。测量结果与仿真结果基本吻合,验证了该设计方法的有效性。
A novel S-shaped electromagnetic band gap (EBG) ultra-wideband band-pass filter based on sub-strate integrated waveguide (SIW) is proposed. The filter is designed based on the band-stop characteris-tics of EBG and can obtain ultra-wideband by etching different dimensional S-shaped on the surface of sub-strate integrated waveguide. The designed band-pass filter with a center frequency as 9.03 GHz and rela-tive fractional bandwidth 26.14% shows good band-pass characteristics with the frequency band between 7.85-10.21 GHz while the insertion loss is less than 1.54 dB and still the designed filter has the advan-tage of narrow band-pass, low insertion loss, compacted and good selectivity etc. that's better than the re-suits in the referrence[8-10], the good agreement between the measured results and the simulated results demonstrates that the design of this proposed filter is effective.
出处
《空军工程大学学报(自然科学版)》
CSCD
北大核心
2013年第3期54-57,共4页
Journal of Air Force Engineering University(Natural Science Edition)
基金
陕西省自然科学基金资助项目(2011JM8025)
毫米波国家重点实验室基金资助项目(K201201)
关键词
电磁带隙
超宽带
基片集成波导
electromagnetic band-gap (EBG)
ultra-wideband band-pass
substrate integrated waveguide(SIW)