期刊文献+

60Si2Mn弹簧钢热变形行为研究 被引量:10

Research on Hot Deformation Behavior of 60Si2Mn Spring Steel
下载PDF
导出
摘要 采用Gleeble-3800热模拟试验机对60Si2Mn弹簧钢进行热压缩实验,研究了试样在变形温度为900~1000℃、应变速率为0.5~10s-1条件下的动态再结晶行为。结果表明,在900~1000℃变形,不同变形速率条件下试样均发生了明显的动态再结晶,变形温度对再结晶的影响大于应变速率。本实验条件下60Si2Mn弹簧钢形变激活能为85.15kJ/mol。 The dynamic recrystallization behaviors of 60Si2Mn spring steel were investigated by GleebIe-3800 hot simulator while the deformation temperature were 900-1000℃ and the strain rate were 0.5-10s -1. The results showed that dynamic recrystallization was occurred in 900- 1000℃. The effects of deformation tern perature on recrystallization are more obviously. In this experiment, the deformation activation energy of 60SiMn is 85.15kJ/mol.
出处 《轧钢》 2013年第3期29-31,37,共4页 Steel Rolling
基金 天津钢铁集团有限公司资助项目(KY12-047)
关键词 弹簧钢 热模拟 动态再结晶 形变激活能 热变形 spring steel thermal simulation dynamic recrystallization deformation activation energy hot deformation
  • 相关文献

参考文献7

  • 1干勇,田志凌,董瀚,等.中国材料工程大典第3卷钢铁材料工程(下)[M].北京:化学工业出版社,2006.
  • 2洪国华,杨顺虎,肖波,周建.国内外弹簧钢的生产现状和发展前景[J].现代冶金,2009,37(1):1-4. 被引量:37
  • 3中国国家标准化管理委员会.弹簧钢[M].北京:中国标准出版社,2007.
  • 4Mcqueen H J, Ryan N D, Fry E. Hot Working Charaeteris tics of Steels in Austenitie State[J]. Journal of Materials Processing Technology, 1995, 53(1).. 293.
  • 5Mcqueen H J, Belling J. Comparative Constitutive Constants for Hot Working of A1-4. 4Mg-0.7Mn (AA5083) [J]. Jour- nal of Materials Engineering and Performance, 2001, 10(2) : 164.
  • 6寇琳媛,金能萍,张辉,韩逸,吴文祥,李落星.7150铝合金高温热压缩变形流变应力行为[J].中国有色金属学报,2010,20(1):43-48. 被引量:38
  • 7曾松盛,刘旭辉,彭伟,成小军.冷轧基板SPHE动态再结晶行为研究[J].轧钢,2011,28(1):35-38. 被引量:4

二级参考文献13

  • 1张斌,张鸿冰.35CrMo结构钢的热变形行为[J].金属学报,2004,40(10):1109-1114. 被引量:24
  • 2王秉新,周存龙,徐旭东,刘相华,王国栋.Mn-Cr齿轮钢动态再结晶行为及组织演变[J].材料科学与工艺,2006,14(4):377-380. 被引量:4
  • 3魏立群,祁捷.B72LX钢的动态再结晶数学模型[J].钢铁研究学报,2006,18(9):44-46. 被引量:17
  • 4阿久津忠良.高强度悬架はね用钢の开发[J].电气制钢,1992,63(1):70-75.
  • 5Nam W J,Choi H C.High strength steel wire rod for suspension coil spring[J].Wire J.Inter.,1996,(5):94-97.
  • 6岛冢史郎,高桥顺次,梅泽修.Si-Mn钢の1パス强加工によゐ为微细フエライト粒组织の形成[J].CAMPISIJ,1999,12:365-368.
  • 7Fabregue P In,Jonas J Jed.Advances in Hot Deformation Texture and Microstrueture[A].Proceedings of the International Conference on Microstructure and Texture in Steels and Other Marerials[C].New York:The Materials Metals & Materials Society,1994.
  • 8张亚信,安树均.制造汽车板簧的新型弹簧钢28锰硅硼钢[P].中国:CN85100775A,1986.
  • 9杨培义,杨其萍.新型汽车板簧用钢[P].中国:CN85100259A,1986.
  • 10杨培义 杨其萍.新型汽车板簧用钢的研究[J].钢铁研究总院学报,1986,6(3):39-45.

共引文献75

同被引文献58

引证文献10

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部