期刊文献+

基于静态IP的无线Mesh网设计与实现 被引量:1

Design and Implementation of Wireless Mesh Networks Based on static IP
下载PDF
导出
摘要 针对特定应用,为了给一些终端提供快速、临时的网络服务,设计了基于802.11的无线Mesh网,采用基于静态IP的地址转换方法,实现了移动IP功能,保证已开发好的接入终端在网内能自由移动通信,同时采用了多网卡多信道技术以支持视频等高带宽应用,并采用多径源路由以保证高效的包发送速率;最后,文中基于Click Modular Router对系统进行了实验,实验表明网络工作稳定可靠,两点平均传输速率可以达到1.5MB/s. We designed an 802.11 based wireless Mesh network to fulfill some new application's demand for temporary and rapidly net work service. In order to guarantee developed node freely moved when it communicate with others node, we adopt static IP translation meth ods to achieve mobile IP. At the same time, we adopted multi Nic multi channel distribution management to guarantee communication band width and multipath source routing protocol to ensure reliable and efficient packet transmission speed. Finally, Verifying by Click Modular Router based testbed, the network work is reliable and the average transmission rate can reached 1. 5MB/s between two mobile instru ments.
出处 《计算机测量与控制》 北大核心 2013年第6期1675-1678,共4页 Computer Measurement &Control
基金 国家科技重大专项(2012ZX03005007) 西北工业大学基础研究基金(JC20100218)
关键词 Wireless MESH Network 移动IP CLICK Modular ROUTER Wireless Mesh Network Mobile IP Click Modular Router
  • 相关文献

参考文献11

  • 1Rajeev Tripathi, Neeraj Tyagi, A. K. Mi- shra. Enhancement of Route Maintenance in AODV over Hybrid Wireless Mesh Network. Recent Advances in Information Technology (RAIT), 2012 1st International Conference on. 15 -17 March 2010. 273 -278.
  • 2Matinen ]. Hostapd Authenticator und WPA Supplicant I-Online, Jun 2010. http: //hos- tap. epitest, fi/.
  • 3hostapd IEEE 802.11 AP, IEEE 802. 1X/ WPA/WPA2/EAP/RADIUS, Thu May 10, http: //hostap. epitest, fi/hostapd/.
  • 4Johson D, Hu y, Maltz D. The Dynamic Source Routing Protocol for Mobile Ad Hoc Networks for IPv4. rfc4728. 2007.
  • 5Lu T, Fan M Y, Wang W Y. DSR Optimization in Trusted Multi _ Hop Ad Hoc Networks Adopting IEEE 802. 11 Technology. Wire- less Communications, Networking and Mobile Computing, 2011 7th International Conference on. 1 - 4.
  • 6Mauricio Tsugawa , Jos6 A. B. Fortes. Characterizing user-level network virtualization: performance, overheads and limits. Interna- tional Journal of Network Management. Volume 20 June 2010. 149 - 166.
  • 7郭亮,朱怡安,迟文明.基于跳数场的无线传感器网络路由协议研究[J].计算机测量与控制,2010,18(5):1214-1216. 被引量:4
  • 8丁雄,谢鲲.基于多径路由负载均衡的动态源路由协议[J].计算机应用研究,2010,27(6):2249-2253. 被引量:7
  • 9Anand Prabhu Surbramanian, A. J. Anto, Janani Vasudevan and P. Natayanasamy, Multipath Power Sensitive Routing Protocal For Mobile Ad Hoe Network, Lecture Notes in Compute Science 2004, Volume 2928/2004, 84 - 89.
  • 10Kohle E, Morris R, Chen B, et al. The Click Modular Router. ACM Transactions on Computer Systems (TOCS) I-J]. Volume 18 Issue 3, Au. 2000.

二级参考文献31

  • 1孙磊,葛临东.一种节点独立的MANET网络多径路由协议[J].计算机工程与应用,2005,41(3):159-161. 被引量:11
  • 2苏静,郭伟.无线移动自组织网路由协议综述[J].中国测试技术,2005,31(2):91-93. 被引量:7
  • 3汪泉弟,李彬,刘青松.无线传感器网络能量多路径路由研究[J].信息与控制,2006,35(2):129-134. 被引量:13
  • 4孙立明.无线传感器网络[M].北京:清华大学出版社,2005:137-140.
  • 5Hong X Y, Gerla M, Wang H B. Load balanced , Energy--Aware Communications for Mars Networks [A]. proceedings of the 2002 Aerospace Conference [C]. Piscataway, USA: IEEE, 2002. 1109 - 1115.
  • 6Henzelman W R. An Application--specific Protocol Architectures for Wireless Net--Works [D]. [S. l]: Massachusetts Institute of Technology, 2000.
  • 7PERKINS C E,BHAGWAT P.Highly dynamic destination-sequenced distance-vector(DSDV) routing for mobile computers[C] //Proc of ACM SIGCOMM'94.New York:ACM Press,1994:234-244.
  • 8MURTHY S,GARCIA-LUNA-ACEVES.An efficient routing protocol for wireless networks[J].Mobile Networks and Applications,1996,1(2):183-197.
  • 9PERKINS C,ROYER E,DAS S.Ad hoc on demand distance vector (AODV) routing[R].Fremont,California:The Internet Engineering Task Force,2002.
  • 10JOHNSON D,HU Y,MALTZ D.RFC 4728,The dynamic source routing protocol(DSR)for mobile Ad hoc networks for IPv4[S/OL].(2007-02-02).http://tools.ietf.org/html/rfc4728.

共引文献22

同被引文献3

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部