期刊文献+

波节管固有频率计算方法的研究

Analytic Calculation Method for Natural Frequency of Bellows Bending Vibration
下载PDF
导出
摘要 将波节管简化成附有n个集中质量且具有相同抗弯刚度的等截面直管,通过填补法对波节管进行单元离散化,采用旋转壳的分段积分法计算,利用里茨法进行波节管的特征值分析,计算得到波节管弯曲振动的前二阶固有频率.并用得到的结果与有关文献进行对比,结果证明该分析方法的有效性与准确性. Abstract: The bellows was considered as n changeless sectional pipe with the same bending rigidity and concentrated mass, and the fill method was introduced to separate the model of the bellows, and then sectional integration method of revolution shells was introduced for calculation. Ritz Method was used to make eigenvalue analysis for bellows and the natural frequency of the bellows bending vibration was obtained. The calculation results were compared with the data of other literatures, and the result proved validity and accuracy of the analytic method.
出处 《沈阳化工大学学报》 CAS 2013年第2期146-149,173,共5页 Journal of Shenyang University of Chemical Technology
关键词 波节管 弯曲振动 固有频率 里茨法 bellows bending vibration natural frequency Ritz method
  • 相关文献

参考文献3

二级参考文献4

  • 1王志文.化工容器设计(第二版)[M].北京:化学工业出版社,1999.21.
  • 2钱颂文 岑汉钊 曾文明.换热器流体诱导振动[M].北京:烃加工出版社,1989..
  • 3朱巨贤,桑培清,郑天孙.GB150-89钢制管壳式换热器[M].北京:学苑出版社,1989,116-121.
  • 4高志伟,金志浩,金文,王质龙.浅析某波节管换热器换热管的破裂原因[J].管道技术与设备,1999(5):23-24. 被引量:1

共引文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部