期刊文献+

脉冲磁场作用下GMAW电弧动态过程分析 被引量:2

Analysis of the Arc Dynamic Process in GMAW Under the Influence of Pulsed Magnetic Field
下载PDF
导出
摘要 针对熔化极气体保护焊短路过渡焊接过程不均匀、电弧稳定性差、飞溅较大且焊缝成形欠佳的缺点,建立了横向脉冲辅助磁场,使其作用于短路过渡焊接过程的熔滴短路时刻,根据短路过渡周期Tc及变异系数CV,优化了辅助磁场MIG/MAG焊接工艺参数.实验表明:当脉冲磁场持续时间ton取值为特定焊接参数下短路时间T1的统计平均值时,短路过渡周期趋于均匀,电弧短路过渡周期Tc及变异系数CV降低,短路过渡液桥加速断开,短路峰值焊接电流降低,从而使短路过渡末期能量积累以及电爆炸飞溅几率降低,并且使熔滴过渡过程稳定. In the gas metal arc welding process with short circuiting transfer mode has un-regularity, poor arc stability, larger spatter, and poor weld form, the horizontal pulsed auxiliary magnetic field in the short circuiting transfer welding process was established. According to short circuiting transfer period To and its coefficient of variation CV, optimize the applied auxiliary magnetic field and the MIG/MAG welding process parameters. The controlled auxiliary magnetic field can reduce both of the arc short circuiting transfer period To, and the coefficient of variation CV. When the statistical average of the pulsed magnetic field duration ton take value for the specific welding parameters short circuiting time T1 , making short circuiting transfer period tends to be uniform. The experiments show that make the applied magnetic field strength appropriate arc short circuiting transfer period To and the coefficient of variation CV lower, it can accelerate the disconnection of the short circuiting transfer liquid bridge, reduce the short circuiting peak welding current, thereby reducing the energy accumulation at the end of the short circuiting transfer, so as to reduce the electrical explosion spatter loss rate of the process and keep the metal transfer stable.
出处 《北京工业大学学报》 CAS CSCD 北大核心 2013年第7期971-975,共5页 Journal of Beijing University of Technology
基金 国家自然科学基金资助项目(50205001) 光机电装备技术北京市重点实验室资助项目(KF2010-02)
关键词 脉冲磁场 熔化极气体保护焊 高速摄像 短路过渡 电弧稳定性 pulsed magnetic field GMAW high-speed camera short circuiting transfer arc stability
  • 相关文献

参考文献8

二级参考文献23

  • 1杨林,王宝,D.Rehfeldt,宋永伦.焊接电参数的一种新型测试方法[J].华北工学院学报,2005,26(1):75-77. 被引量:10
  • 2赵纪元,何正嘉,孟庆丰,程正兴.小波包—自回归谱分析及在振动诊断中的应用[J].振动工程学报,1995,8(3):198-203. 被引量:24
  • 3安藤弘平 施雨湘(译).焊接电弧现象[M].北京:机械工业出版社,1985.514-528.
  • 4殷树言.从不同的控制方式中探索短路过渡CO2焊接的飞溅问题[J].焊接学报,1986,7(12):187-192.
  • 5蒋力培.焊机动特性影响焊接飞溅的机理研究[J].焊接学报,1987,8(1):38-43.
  • 6俞建荣.CO2焊接一元化自寻优控制的研究,博士学位论文[M].西安:西安交通大学,1999..
  • 7Elliottk,Stava. The surface-tension-transfer power source :a new,low spatter arc welding machine[J]. Welding journal, 1993,72(1) :25-29.
  • 8Stava E K. A new, low-spatter arc welding machine [J]. Welding Journal, 1993,72:25-29.
  • 9T Shinoda,H Kaneda and Y Takeuchi.An evaluation ofshort circuiting arc phenomena in GMA welding [J].Welding Reserch Abroad,June/July1990.
  • 10Rehfeldt D,Bollmann A.Using statistical signal analysis for analyzing and monitoring GMAW processes[A].Proceedings of the Symposium on "Strategy of Welding Research in 2000 and Possible Aspects of China-Germany Cooperation"[C].Beijing:China,1991.

共引文献70

同被引文献21

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部