摘要
采用基线长为60 m的一对数字摄像机,构成双目成像云底高度测量系统,随着数字摄像技术和立体视觉传感器的发展,尤其是双目成像视觉传感器以结构简单、使用方便、测量精度高等诸多优点而被广泛应用。通过直方图均衡化方法对图像进行增强,利用亚像素角点检测器检测角点提高测量精度,并采用归一化互相关方法进行区域相关检测寻找同名点,将外极线约束引入图像匹配过程中进行同名点粗差去除,提高测量准确度;再根据匹配特征点得到相对视差,利用摄影测量原理计算云底高度;建立三维实验室标校场对相机进行内外方位元素标校,利用星星相对位置与相机姿态角的关系对相机进行现场标校,简化标校系统提高测量精度。利用2011年5月1日—6月30日采集的样本,在北京市观象台与维萨拉生产的CL31激光云高仪进行对比试验,并对产生云底高度测量系统误差的可能原因做出具体分析。
A pair of digital cameras whose baseline length are 60 meters are used to constitute a binocular imaging cloud base height measurement system,which can be used in image acquisition,processing,calibration, the whole sky cloud image splicing,cloud high layer and calculation and data storage and terminal display,etc.Along with the digital camera technology and stereoscopic vision sensor development,binocular imaging visual sensor is widely used because of its simple structure,good usability and higher measuring accuracy.Through the laboratory calibration and field calibration for internal and external bearing elements, obtaining two cameras inside,outside elements and relative attitude angle,the measurement accuracy are improved.The CCD acquisition cloud image has some disadvantages such as poor texture and low signal-to-noise ratio,therefore,image enhancement and filtering pretreatment should be carried out to meet the image feature extraction and matching requirements.Through the method of histogram equalization to enhance the images,sub-pixel corner point detector are used to improve the measurement precision. The normalized cross-correlation method for regional correlation are adopted for same name point detection, which will be eliminated by introducing the polar constraint reference to image matching process. Then according to the matching feature points,getting relative parallax,height of cloud base can be calculated by use of photography measurement principle.The cameras are calibrated in lab for internal and external elements first,then calibrated using the star relative position and attitude angle of camera relationship on the spot,which ensures the measurement precision.In Beijing,with CL31 ceilometer for contrast test,concrete analysis are carried out to investigate the system error and possible causes for this cloud height measurement system. Binocular imaging cloud base high measuring methods is direct photogrammetry method,which has overcome the poor accuracy of passive remote sensing and improved the measuring accuracy.According to the analysis,the accuracy can be improved through improving camera resolution,calibrating the internal and external elements of camera,correcting relative attitude angles of the two cameras,and controlling sample synchronization time and so on. However,visible light image sensor is greatly influenced by light and obstruction,which is only suitable in a daylight and when the cloud image texture is clear.In order to reduce the influence of illumination and improve data acquisition rate,infrared image sensor can be used to constitute a binocular imaging cloud base high measuring system,to realize cloud base high measurement.
出处
《应用气象学报》
CSCD
北大核心
2013年第3期323-331,共9页
Journal of Applied Meteorological Science
基金
中国气象局气象新技术推广项目(CMATG2010Z06)
关键词
云底高度
图像处理
摄影测量
现场标校
cloud base height
image processing
photogrammetry
field calibration