期刊文献+

实心转子感应电动机高速运转性能分析 被引量:1

Analysis of high-speed operation performance of induction motor with solid rotor
下载PDF
导出
摘要 分析了实心转子感应电动机的磁路及M-S曲线;采用Ansoft有限元软件对电动机变频启动的动态过程进行仿真,得到了空载启动的磁场分布、定转子电流、启动转矩等动态数据;测试了电动机在高频高速状态下的性能,论证了实心转子感应电动机高速运行的可行性。 The paper analyzed magnetic circuit and M-S curve of induction motor with solid rotor,used Ansoft finite element software to simulate dynamic process of variable frequency starting of the motor,and got dynamic data of no-load starting including magnetic field distribution,stator and rotor current,starting torque and so on.It detected performance of the motor under the condition of high frequency and high speed,and demonstrated feasibility of high-speed operation of the induction motor with solid rotor.
作者 王映红
出处 《工矿自动化》 北大核心 2013年第7期54-58,共5页 Journal Of Mine Automation
关键词 实心转子感应电动机 高速运转 性能测试 性能分析 变频启动 有限元分析 induction motor with solid rotor high-speed operation performance test performance analysis variable frequency starting finite element analysis
  • 相关文献

参考文献5

二级参考文献19

  • 1张东,江建中,屠关镇.基于时步有限元法的永磁无刷直流电机特性仿真[J].电机与控制应用,2005,32(9):8-13. 被引量:4
  • 2M. A. Jabbar, ZhejieLiu. Time-stepping Finite-element Analysis for the Dynamic Performance of a Permanent Magnet Synchronous Motor. IEEE Transactions on Magnetics, 2003, 39 (5).
  • 3Dengjun YAN, Ruifang LIU. The Calculation of the Transient Performance in the PMSM with the Time-stepping FEM Based[C]. Electrical Machines and Systems, 2003. ICEMS 2003. Sixth International Conference on Volume 2, 9-11 Nov. 2003, (2)819-822.
  • 4Andrej Stermecki, Igor Ticar. Numerical Analysis of Permanent- Magnet Motor Performance Considering Rotor Movement. IEEE Transactions on Magnetics, 2005, 41 (5).
  • 5Masato Ota,Shigenori Andoh.Super High Speed Motor With Magnetic Bearing for Machine Tool Spindle[C]. IPEC'95,Yokohama: 1995: 1350~1355.
  • 6Barry M, Cheri L, Gregory D. Development of an 11000-r/min 3500-hp Induction Motor and Adjustable-speed Drive for Refinery Sevicr[J]. IEEE TRANSACTION ON INDUSTRY APPLICATION, 1997, 33(3): 815~825.
  • 7Keshi A, Tomita H,Miyashita O. Power and Speed Limitation in High Speed Electrica Machines[C]. IPEC'95, Yokohama: 1995: 1321~1326.
  • 8Major R V, Limited Crawley, West Sussex. Development of High Strength Soft Magnetic Alloys for High Speed Electrical Machines[M]. The Institution of Electrical Engineers, London: 1998: 8/1~8/4.
  • 9Boglietti A, Ferraris P, Lazzari M. About the Design of Very High Frequency Induction Motors for Spindle Applications[J].Electric Machines and Power Systems, 1997 ,25: 387~409.
  • 10Sarri J, Arkkio A. Losses in High-Speed Asynchronous Motor. Helsinki University of Technology Laboratory of Electromechanics, FINLAND: 1996: 704~708.

共引文献56

同被引文献9

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部