摘要
现有的连续油管作业机存在对中井口困难、位移调节范围小、运输不便等缺点。研制了LXGFC40型连续油管作业机。井架为单节桅形双开口结构,液压缸起升,便于对中井口。天车的位置可通过液压力调整,以便调整注入头的位置。前支架的滚杆结构使井架放倒后绞车的钢丝绳受力,便于排绳。试验证明,该作业机能够满足深度2 000m井的作业要求,适应复杂路况,操作方便。
The coiled tubing unit currently is difficult to wellhead operation and the short distant to adjusted and moving unhandy. Considering these probiem,LXGFC40 coiled tubing units was de- veloped. The mast is one section,front and rear open,hydraulic raising and contracting,flexibility operation;the injector is adjust, through the crown block by hydraulic in left and right, the roll- bar The and of the front racket has good performance for line exper movln iment shows that the unit meeting the task g flexibility under complex road condition. arrange orderliness after contracting mast. of 2000 meters drilling, behavior stability
出处
《石油矿场机械》
2013年第6期58-60,共3页
Oil Field Equipment
关键词
连续油管作业机
结构
研究
coiled tubing unit
structure
reseflrc}l
