期刊文献+

液-液旋流分离器内流动特性的大涡模拟 被引量:3

Large Eddy Simulation of Flow Field in Liquid-Liquid Hydrocyclone
下载PDF
导出
摘要 基于柱坐标系下的瞬态N-S方程,采用标准Smagorinsky-Lilly模型,对旋流分离器内的单相流动特性进行了大涡模拟研究,获得了旋流分离器内的瞬时流场、时均速度与湍动能分布,并将结果与雷诺应力模型(RSM)及实测结果进行了对比。结果表明,大涡模拟方法可以得到旋流分离器内的瞬态流场,且能够反映更多的流场细节;对时均速度的预测与实测数据吻合良好,精度优于RSM模型;对湍动能的模拟与RSM方法差异显著,但其结论更符合以往理论分析与实测的结果。相比采用时均方法的RSM模型,大涡模拟方法对此类旋流湍流具有更好的模拟能力。 Based on transient navier-stokes equations in cylindrical coordinate, the Smagorinsky-LiIly model and large eddy simulation (LES)were used to simulate single phase flow characteristics in hydrocyclone so as to obtain the transient flow field, mean velocity and transient flow field distribution; having the result compared with Reynolds stress model (RSM) and actual measurement result shows that the transient flow field in hydrocyclone can be obtained through LES which outperforms RSM model in predicting mean velocity and simulating turbulent kinetic energy.
出处 《化工机械》 CAS 2013年第3期335-339,409,共6页 Chemical Engineering & Machinery
基金 国家自然科学基金资助项目(1172061)
关键词 旋流分离器 大涡模拟(LES) 瞬态流场 时均速度 湍动能 hydrocyclone, LES, transient flow field, mean velocity, turbulent kinetic energy
  • 相关文献

参考文献7

二级参考文献15

  • 1周世辉 时铭显.EPVC-1A旋风管的流场分析[J].化工学报,1988,(5):599-607.
  • 2陆耀军.液-液旋流分离管结构选型实验研究.中国工程热物理学会多相流学术会议文集(Ⅲ-87)[M].洛阳:中国工程热物理学会,1996..
  • 3陆耀军.液-液旋流分离管中强旋湍流两相流动分离的实验与数值模拟研究(博士学位论文)[M].清华大学,1997..
  • 4柳绮年 贾复.旋风分离器三维流场测定[J].力学学报,1978,(3):182-191.
  • 5孙启才 雷明光 等.水力旋流器内单相液体速度场的研究[J].流体工程,1988,18(6):341-349.
  • 6张炯.水力旋流器中液体切向速度分布的研究[J].有色金属,1965,(12):32-38.
  • 7贺杰,水力旋流器,1996年,21页
  • 8孙启才,流体工程,1988年,6期,341页
  • 9张炯,有色金属,1965年,12卷,32页
  • 10陆耀军,博士学位论文,1997年

共引文献46

同被引文献28

  • 1文吉运,于波,陆宏圻,崔泰俊,朱正哲.射流泵内流场的大涡模拟[J].武汉大学学报(工学版),2007,40(2):110-114. 被引量:10
  • 2张兆顺,崔桂香,许春晓.湍流大涡数值模拟的理论和应用[M].北京:清华大学出版社,2009.236-247.
  • 3BRENNEN,C.E. hydrodinamics of pumps[M].Oxford University Press and CETI Inc,.
  • 4Lucius A,Brenner G. Unsteady CFD simulations of a pump in part load conditions using scale-adaptive simulation[J].International Journal of Heat and Fluid Flow,2010,(06):1113-1118.
  • 5Saeed R A,Galybin A N,Popov V. 3D fluid structure modelling and vibration analysis for fault diagnosis of Francis turbine using multiple ANN and multiple ANFIS[J].Mechanical Systems and Signal Processing,2013,(01):259-276.
  • 6Dong R,Chu S,Katz J. Effect of Modification to Tongue and Impeller Geometry on Unsteady Flow,Pressure Fluctuations and Noise in a Centrifugal Pump[J].ASME Turbomachinery,1997.506-515.
  • 7Raul Bappio,Jorge Parrondo,Eduardo Blanco. Numerical analysis of the unsteady flow in the near-tongue region in a volute-type centrifugal pump for different operating points[J].Computers & Fluids,2010,(05):859-870.
  • 8Eduardo Blanco,Raul Bappio,Jorge Pappomdo. Fluid-Dynamic Pulsations and Radial Forces in a Centrifugal Pump with Different Impeller Diameters[J].ASME Journal of Fluids Engineering,2005.1461-1470.
  • 9Barrio R,Fernandez J,Parrondo J. Estimation of radial load in centrifugal pumps using computational fluid dynamics[J].European Journal of Mechanics B/Fluids,2011,(01):316-324.
  • 10Pei J,Dohemn H J,Yuan S Q. Investigation of unsteady flow-induced impeller oscillations of a single-blade pump under off-design conditions[J].Journal of Fluids and Structures,2012.89-104.

引证文献3

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部